Hyundai H-HG1-42-UI578 Instruction Manual page 11

Gas ceramic heater
Gas cylinder replaces
1. Make sure that the heater is switched of.
2. If it is necessary to replace an empty gas cylinder, shut gas screwing the gas check valve on the
cylinder clockwise up to the stop.
3. Remove the cylinder clamp and take the cylinder out of the heater body.
4. Remove the gas pressure reducer from the cylinder unscrewing its cap nut.
5. Connect and install a full gas cylinder as indicated in Section
6. Preparation for work.
IMPORTANT!
Do not smoke during replacement of the cylinder.
Do not replace the cylinder, if there is an open lame source nearby.
Keep gas cylinders in a separate well-ventilated room far from combus-
tible materials. It is prohibited to store and operate gas cylinders in lats
of high-rise buildings, cellars, garrets.
11.
EN