Nevir NVR–3565P Instruction Manual page 8

Dry Ironing:
1. The steam ironing ca be used on the dry setting with or without water on the
water tank, however it is best to avoid having the water tank too full while dry ironing.
2. Turn the variable steam control to the minimum position.
3. Select the setting on the temperature control dial best suited for the fabric to be ironed.
How to spray:
Press the spraying button, steam will be sprayed out from the spraying nozzle. At that time,
you should keep enough water in the water tank.
Steam ironing:
1. Set the temperature control dial to the "MAX" OR "..." position.
2. Set the variable steam control to the middle position.
How to use bursting steam:
1. Turn the temperature control dial to the "MAX" or "..." position.
2. Turn the variable steam control to the maximum position.
Note: To prevent water leakage from the soleplate, do not keep the
powerful steam button pressed more than 5 seconds.
How to use self clean:
Set the temperature control to the maximum position, press the self
clean button, strong steam will be sprayed, ironing can self clean (Sure
the water tank has enough water).
Anti-drip function:
Your steam iron has anti-calc function that protects your
appliance from scale.
A special filter inside the water reservoir softens the water
and prevents scale build-up in the plate. The resin filter is
permanent and does not need replacing.
8