Bose PERSONAL Owner's Manual page 33

This disc contains important updates for your Bose® Wave®
music system. Using it takes just a few minutes.
IMPORTANT: Be sure the system is plugged in.
1 Press the CD button on the remote control.
2
Insert the update disc into the CD slot.
The update should start automatically, and within a few seconds
the following messages appear on the display:
READING, DISC, LOADING, UPDATING.
NOTE: If READING
does not appear, press the Play/Pause button on
the remote.
3 Wait, and do not press any other buttons while the update
continues. It should take less than a minute.
Other messages may appear, including: FINISHED or EJECTING.
The display may also appear blank very briefly.
4
Remove the update disc when the system ejects it from the CD slot.
This indicates that the update is completed.
NOTE: If the display remains blank for more than 10 seconds, and the
system does not eject the disc, press the On/Off button on the remote
control. If an error message appears on the display, please write down
the code and call Bose Customer Service. Refer to the address list
included with your Bose product.
This completes the update. Your system is now ready for use.
©2005 Bose Corporation. PN 286227 CCM-000924