Samsung GT-S5200 Service Manual page 87

Exploded View and Parts List
9
1)Sliding up,F-PCB is connected with
Main PBA.
2) Put F-PCB into the FRONT'S hole.
1) Handle with care the F-PCB not to be torn or
damaged.
2) Check the gap between the intenna and front.
11
1) Assemble REAR.
2) Screw 4 Points as marked.
. 1.25 ~ 1.35 Kgf·cm
. 1.4*4 (6001-002005, SILVER)
1) Be careful not to be damaged and scratched.
2) Handle with care the F-PCB not to be torn or
damaged.
This Document can not be used without Samsung's authorization
SAMSUNG Proprietary-Contents may change without notice
10 1) Key F-PCB is connected with the main
PBA.
1) Screw 2 Points as marked.
. 1.4 * 3 SCREW
. 1.25~ 1.35 Kgf·cm
①
1) Be careful not to be damaged and scratched.
12
1) Put the RF cover into the hole.
2) Check the appearance and its function.
1) Please final check exterior view and performance of
phone.
11-6
②
③