Table of Contents
Advertisement
Advertisement
Table of Contents
Summary of Contents for Q-Sat q17
- Page 1 USER’S MANUAL...
-
Page 2: Table Of Contents
USER’S MANUAL Table of Contents PAGE General Introduction..........................5 Remote Controler............................6 Appearance............................6 Key Definition............................7 Working Modes & Menu Structure......................9 Working Modes........................... 9 Menu Structure........................... 9 3.2.1 Installation Menu........................ 10 3.2.2 Channel Menu........................10 3.2.3 Setting Menu........................11 3.2.4 Utility Menu.......................... - Page 3 USER’S MANUAL Native32 Games..........................31 Record Manager..........................31 Disk Manager............................33 EBook..............................35 Network Mode............................36 News..............................37 YouTube.............................38 Dailymotion............................40 Native32 Game..........................40 Photo..............................43 Google Map............................46 Weather............................. 48 IPTV..............................49 Main Menu..............................52 Installation............................52 7.1.1 Antenna Setting........................52 7.1.2 Satellite List......................... 54 7.1.3 Transponder List.........................55 7.1.4 Motor Setting........................
- Page 4 USER’S MANUAL 7.3.11 HDMI Deep Color....................... 74 7.3.12 Ethernet Config........................74 7.3.13 Factory Reset........................77 7.3.14 Version..........................77 7.3.15 MultiMedia Setting.......................78 7.3.15.1 MP4 Subtitle Language....................79 7.3.15.2 MP4 Subtitle CodePage....................79 7.3.15.3 EBook Language......................80 7.3.15.4 EBook CodePage......................81 7.3.15.5 MovieRepeat.MusicRepeat and PhotoRepeat............81 7.3.15.6 BGmusic..........................81 7.3.15.7 Slide Time..........................82 7.3.15 Effect item..........................82 Utility..............................83...
-
Page 5: General Introduction
USER’S MANUAL 1 GENERAL INTRODUCTION This document is an operation manual for users to operate SPHE1512 DVB-S2 STB products. It includes these chapters: Remote Control Working Modes & Menu Structure DTV Mode Multimedia Mode Network Mode ... -
Page 6: Remote Controler
USER’S MANUAL 2 REMOTE CONTROLER 2.1 Appearance... -
Page 7: Key Definition
USER’S MANUAL 2.2 Key Definition Description POWER Switch of power supply. MUTE Mute control. Switch Daily and Weekly modes while in EPG state. Red function key Lock or unlock the selected program while in program management state. Delete all the scheduled programs while in the scheduled program list. - Page 8 USER’S MANUAL Description Stop multimedia playback. STOP Stop recording. Record the current program while in full screen playing state. MENU Enter or exit the main menu. EXIT Exit the current menu. Left/right direction keys. LEFT/RIGHT Volume up/down. ...
-
Page 9: Working Modes & Menu Structure
USER’S MANUAL 3 WORKING MODES & MENU STRUCTURE 3.1 Working Modes At present the system has three working modes: DTV Mode, Multimedia Mode and Network Mode. In DTV mode you can watch digital TV programs. In Multimedia mode you can play multimedia files and games, record files, manage disks, and so on. -
Page 10: Installation Menu
USER’S MANUAL 3.2.1 Installation Menu Antenna Setting Satellite List Installation Transponder List Motor Setting Limit Setup Installation Menu 3.2.2 Channel Menu Channel Manager Channel Editor Channel Favorite List Channel Setup Delete All Channel Channel Menu... -
Page 11: Setting Menu
USER’S MANUAL 3.2.3 Setting Menu Preference Setting Ethernet Config Ethernet Config PVR Setting PVR Config MultiMedia Setting System Setting Menu 3.2.4 Utility Menu Timers Utility Smartcard Utility Menu 3.2.5 Game Menu Box Man Tetris Game Hit Rat Go Bang Sudoku... -
Page 12: Upgrade Menu
USER’S MANUAL Game Menu 3.2.6 Upgrade Menu USB/Card Upgrade Upgrade OTA Upgrade FTP Upgrade Upgrade Menu 3.2.7 MultiMedia Menu Movie Music Photo MultiMedia Game Ebook Record Manager Disk Manager Network MultiMedia Menu... -
Page 13: Dtv Mode
USER’S MANUAL 4 DTV MODE 4.1 System Initialization When entering the system for the first time, you should do some initialization settings on the system including OSD language, time zone, active antenna etc. See the figure below for the setting menu. After setting, select the Start Search option and then press OK key to start auto scan. -
Page 14: Volume Adjustment And Mute Control
USER’S MANUAL Database Empty Message Otherwise, the last program being played before the previous power off will be played. If the system fails to play the program, please check the power connection and antenna connection. Power on When the machine is in Standby mode, press POWER key to turn it on. ... -
Page 15: Channel Switching
USER’S MANUAL 4.5 Channel Switching The system provides many methods to switch channels. See the descriptions below: Method 1: While in full screen playing state, press Up/Down keys to play the next or previous TV program channels or radio stations. ... - Page 16 USER’S MANUAL Satellite Select Menu Method 5: If you have set favorite programs, press the green function key and a Favorite list will appear (see the figure below). At this point, you can press UP/DOWN keys to select a Fav item and then press OK key to enter its program list. Favorite List Pressing EXIT key can exit the menu.
- Page 17 USER’S MANUAL Find Channel by Name Press UP/DOWN/LEFT/RIGHT keys to select a character and then press OK key to input. When you have finished inputting a channel name, press the blue function key to confirm your input. (Pressing the red function key can change case. Number keys cannot be used to input numbers here.) ...
-
Page 18: Program Info Display
USER’S MANUAL 4.6 Program Info Display While in full screen playing state, press INFO key to show the brief information of the being played program. See the figure below: Brief Program Info 4.7 Program Recall (Recall to the previous channel) While in full screen playing state, press EXIT key to return to the previously played TV program channel or radio station. -
Page 19: Electronic Program Guide (Epg)
USER’S MANUAL Language and Sound Channel Select Menu 4.8.1.1.2 Press LEFT/RIGHT keys to change sound channels among Left, Right and Stereo; press UP/DOWN keys to choose audio language. 4.8.1.1.3 Press OK key to confirm the setting and return to the program playing state. 4.9 Electronic Program Guide (EPG) To get the information of programs being played or to be played in coming days, press EPG key to enter the electronic program guide (EPG). - Page 20 USER’S MANUAL Daily Mode Red function key: Enter the Weekly Mode. Yellow or blue function keys: Press one of the two keys to switch days from Monday to Sunday. Green function key: If the selected program is being played, pressing this key can record the program.
- Page 21 USER’S MANUAL Weekly Mode Press LEFT/RIGHT keys to switch the highlight between the two list windows. Press the red function key to enter the Weekly Mode. Press the yellow or blue function keys to switch to the page of the previous or next days.
-
Page 22: Teletext
USER’S MANUAL 4.10 Teletext Press TTX key to enter the Teletext mode. See the figure below: Teletext Pages Basic Operations At the bottom of a Teletext page, enter a page number (range: 100~899) to go to corresponding page. Press UP/DOWN keys to turn to the previous or next pages. -
Page 23: Ttx Subtitle
USER’S MANUAL Subtitle Menu 4.11.2 Press UP/DOWN keys to select a subtitle language to play. 4.12 TTX Subtitle TTX Subtitle is closed by default too. To open it: 4.12.1 Press SUBTITLE key to enter the Subtitle menu. See the figure below: TTX Subtitle Note that, in the above figure, there is an icon behind the language menu item. - Page 24 USER’S MANUAL 4.12.2 Press UP/DOWN keys to select a TTX subtitle language to play.
-
Page 25: Multimedia Mode
USER’S MANUAL 5 MULTIMEDIA MODE In Multimedia mode, you can play multimedia files and games; also can carry out record management and disk management. See the figure 3-8: Module Select :displays the current multimedia type: Network, Movie, ISO, Music, Photo, Game, Ebook, Record Manager or Disk Manager. - Page 26 USER’S MANUAL NO USB (CARD) Device Once a USB device or card is found, the system will initialize the USB device or card. When complete, the following interface will appear: USB (CARD) Device Inserted A – Module Select Area A – List Area B –...
-
Page 27: Movie
USER’S MANUAL At present the system support the following partition formats: FAT, FAT32 and NTFS. In Multimedia Mode, the interface can be divided into 6 areas (see the figure above): List Area (A) displays the file and folder list of the current partition or directory. Preview Area (B) is used to preview photos. -
Page 28: Iso
USER’S MANUAL Video Info: When a video playback starts, the information of the video file will be shown for 3 seconds. You can press INFO key to show the information again after it disappears. Fast Play: Press FR/FF keys to fast move forward or backward through the video. The ... -
Page 29: Photo
USER’S MANUAL Press OK/RIGHT keys to play the selected audio file. (If the audio file is under a folder, pressing LEFT key can exit the folder.) Fast Play: Press FR/FF keys to fast move forward or backward through the audio file. ... - Page 30 USER’S MANUAL Show Photo Switch Image: Press PREV/NEXT keys to play the previous or next images. Zoom: Press the ZOOM function key to enter the zoom state. In this state, you can – press FR/FF keys to zoom in or out the image; ...
-
Page 31: Native32 Games
USER’S MANUAL Native32 Games In Native32 Games list, after selecting a game press OK key to start the game. Game control operations are as below: LEFT/RIGHT key: Control left and right directions. UP/DOWN key: Control up and down directions. ... - Page 32 USER’S MANUAL Recorder Manager If the USB (CARD) device has more than one partition, you should manually set the partition in which record files will be saved. Red function key: Set the selected partition as the default record partition. ...
-
Page 33: Disk Manager
USER’S MANUAL Record Files To play a record file: press UP/DOWN keys to select the record file first and then press OK/RIGHT keys to play it. During playback, the things you can do only include to press FR/FF keys to fast backward or forward play the file, and to press STOP key to return to the record file list. - Page 34 USER’S MANUAL Disk Manager If the selected object is a partition: Green function key: Format the selected partition into FAT32 format. Yellow function key: Format the selected partition into NTFS format. Red function key: Move or copy the files (folders) in this partition. See the figure below.
-
Page 35: Ebook
USER’S MANUAL Move The left list is the Source list, the right list is the Destination list. Before moving or copying a file (folder), the things you should do include: selecting the file (folder) from the left list, then press the green function key to confirm your selection, and then entering the destination directory in the right list. -
Page 36: Network Mode
USER’S MANUAL 6 NETWORK MODE In the Network mode you can browse information and have entertainment from network, which includes these modules: News, YouTube, Native32 Game, Photo, Google Map, Weather and IPTV. See the figure below: Network Function Network Mode Module Structure When the system has started, press SOURCE key to switch to the Network mode. -
Page 37: News
USER’S MANUAL Network Menu In this menu you can press LEFT/RIGHT keys to highlight a function module and then press OK key to enter it. 6.1 News The news module is for reading news online. You can press UP/DOWN/LEFT/RIGHT key to select one type news and then press ok key to enter it, See the figure below： After entering one type news, you can press RIGHT key to switch to news list, press UP/DOWN or P+/P- keys to view more news items online. -
Page 38: Youtube
USER’S MANUAL After selecting a news, you can press OK key to view it. YouTube The YouTube module is for playing video files online. In this Module press RIGHT keys switch to video list area. You can press UP/DOWN key to view more video items online. The video itmes list is as belolw. - Page 39 USER’S MANUAL Weather After selecting a video, you can press OK key to play it. The play interface is as below: Weather If have a sl ow network would display below:...
-
Page 40: Dailymotion
USER’S MANUAL Weather 6.3 Dailymotion Like Youtube, please see 6.2 YouTube. 6.4 Native32 Game The Native32 Game (N32) module provides users with a platform to download Sunplus native32 games. Downloaded games will be stored in a removable storage device such as a U disk. - Page 41 USER’S MANUAL Download Highlight the Download item and then press OK key, and the game download category list will appear. There are many categories: Hot Game, Latest Game, Sports Game, and so on. See the figure below: Game Download Category List After selecting a game category, press OK key to enter the following game list: Game List In this list interface, you can -...
- Page 42 USER’S MANUAL Game Information In this page, you can - Press EXIT key to go back to the upper level interface. Press OK key to download this game. If there is enough memory space, a message will appear to prompt that the game has been completely added to the game download manager list.
-
Page 43: Photo
USER’S MANUAL In the Manager interface, you can – Press the green function key to pause downloading. Press the red function key to start or resume downloading. Press the yellow function key to delete a download task. 6.5 Photo Through the Photo module, you can visit several certain photo websites: Yupoo, Picasa and Flickr. - Page 44 USER’S MANUAL Photo Full Play In the photo full play state, you can - Press the red function key to show related information of the photo. Press the green function key to show photos in slide mode. Default play interval is 3s. Press the yellow function key to counterclockwise rotate the photo 90°.
- Page 45 USER’S MANUAL View Albums In the View Albums page, Press the red function key to show the software keypad. Press the green function key to switch the content of the keypad. Press the yellow function key to enter a space character. ...
-
Page 46: Google Map
USER’S MANUAL Friends 6.6 Google Map Google Map can help users know where they are and the environment around them, and also search for a certain location and surroundings. See the figure below: Google Map In the Google Map page, you can press the red function key to switch between the map search setting area and the map display area;... - Page 47 USER’S MANUAL and City to search for. After above setting, select the Begin button in this page to start to search. See the figure below: Google Map – Viewing a specified area When the search text box at the left side is selected, pressing OK key can call out the following window in which you can manually input a place name to search for.
-
Page 48: Weather
USER’S MANUAL Google Map – Search Result 6.7 Weather The Weather module provides weather forecast information for users. To enter this module, select the Weather item in the Network menu by pressing LEFT/RIGHT keys and then press OK key. See the figure below for the Weather page: Weather In this module you can get current weather conditions and forecast within a week for locations in... -
Page 49: Iptv
USER’S MANUAL OK key to view the weather information of the city. For example, to view Beijing’s weather information, select Beijing City in the search field area and then press OK key. Then you will find the Beijing’s weather information at the right side. 6.8 IPTV The IPTV module is for watching TV Channels online, Press ok key to show NetTV List, see the figure below：... - Page 50 USER’S MANUAL Add a Link If the link is invalid, the following picture will appear: Method 2:you can press green function key to rename the channel name,see the figure below：...
- Page 51 USER’S MANUAL Rename Channel Name Method 3: you can press the yellow function key to show the link of the selected channel see the figure below： Channel’s Link...
-
Page 52: Main Menu
USER’S MANUAL 7 MAIN MENU The Main Menu has seven items: Installation, Channel, Setting, Utility, Game, Upgrade and MultiMedia. which include all setting items of the system. Press MENU key to enter the Main Menu, see the figure below: Main Menu Installation There are five sub items: ... - Page 53 USER’S MANUAL Satellite: Select a satellite from the existing satellite list. Tuner: Set the current working tuner index. LNB Type: Set the working frequency band for LNB (three options: Ku Band, C Band and User). LNB Frequency: Set the local oscillation frequency of LNB. Transponder: Select a transponder from the existing transponder list.
-
Page 54: Satellite List
USER’S MANUAL 7.1.2 Satellite List Satellite List The Satellite List (see figure above) shows all the satellites the system has stored. Users can press color function keys on the remote controller to edit the list, for example to add a satellite (by pressing the red function key), to delete a satellite (by pressing the yellow function key), to scan the selected satellite (by pressing the blue function key), etc. -
Page 55: Transponder List
USER’S MANUAL Edit Satellite 7.1.3 Transponder List In the Installation menu, press UP/DOWN keys to highlight the Transponder List item and then press OK or RIGHT keys to enter the Transponder List page. See the figure below:... - Page 56 USER’S MANUAL Transponder List The Transponder List stores the transponders of current satellite of current system. Each transponder may have multiple frequencies. You can press color function keys on the remote controller to edit the list, for example to add a transponder (by pressing the red function key), to edit a transponder (by pressing the green function key), to delete a transponder (by pressing the yellow function key), to scan transponders (by pressing the blue function key), etc.
-
Page 57: Motor Setting
USER’S MANUAL Edit Transponder After pressing the green function key, you can edit the selected transponder’s detailed information such as frequency, symbol rate and polarisation. When finished, press OK key to exit the editing state. 7.1.4 Motor Setting Through the Motor Setting page you can control the polar axis motor to adjust the direction of antenna so as to make the antenna accurately point to the satellite. -
Page 58: Limit Setup
USER’S MANUAL Motor Setting 7.1.5 Limit Setup Limit Setup... -
Page 59: Channel
USER’S MANUAL There are three sub items: Limit Setup: Polar axis move limit setting. Continuing Move: Enable polar axis continuous move. Move Step: Enable polar axis step move. After setting, you can press LEFT/RIGHT keys to move the polar axis east or west step by step. 7.2 Channel The Channel menu has five items: Channel Manager, Channel Editor, Favorite List Channel Setup and Delete All Channel. - Page 60 USER’S MANUAL Channel Manager Menu If there is no program channel data in the database, ‘No Program’ message will appear and both the Channel Manager and Favorite List menus cannot be accessed. The Channel Manager menu contains these functions: Channel Delete, Channel Skip, Channel Lock and Channel Rename.
-
Page 61: Channel Editor
USER’S MANUAL Rename Channel Name After editing, press BLUE key to confirm. To lock a channel, after selecting the channel press the red function key, and then key in a correct four-digit password (default password: 0000) in the pop-up dialog. When switching to the locked channel you will be asked to give a correct password to watch it. - Page 62 USER’S MANUAL Figure 7- 13 Channel Editor Menu The Channel Editor menu contains two functions: Channel Add and Channel Edit, Press UP/DOWN keys to select the channel and then press the red or green color function keys on the remote control to manage it: press the red function key to add a new channel; the green function key to edit the attributes of selected channel (Channel name, Video/Audio/PCR Pid).
-
Page 63: Favorite List
USER’S MANUAL To edit a channel, press UP/DOWN keys to select the channel, then press the green function key to enter the channel edit page. See the figure below. Figure 7- 15 Editor Channel Menu Press EXIT key to exit the Channel Eidtor menu. 7.2.2 Favorite List The system provides a favorite channels list function. - Page 64 USER’S MANUAL Favorite List Menu There are total 8 favorite lists. You can press the Nunber keys to add channels to corresponding favorite list. One channel can be added into multiple favorite lists. Press EXIT key to exit the Favorite List menu.
-
Page 65: Channel Setup
USER’S MANUAL 7.2.3 Channel Setup This item is to set the default channel after the system boots. By default, after the system boots, the channel that is being played before the previous turning off will be auto played. If you want to make the system always play the Awaz TV every boot on, you can configure the setting items in the Channel Setup menu as follows: Channel Setup Menu 7.3 Setting... -
Page 66: Preference
USER’S MANUAL Preference Menu 7.3.1 Preference The OSD Language item defines the language of menu and prompts. To change the OSD language, press UP/DOWN keys to highlight this item and then press OK or RIGHT keys to pull down a language list. In this list, you can press UP/DOWN keys to select a language and then press OK key to confirm. -
Page 67: Preferred Subtitle
USER’S MANUAL 7.3.1 Preferred Subtitle The Preferred Subtitle item is used to set subtitle languages. When a program has subtitles of multiple languages, we can set priorities for these languages through this item. Two preferred subtitle languages can be set here and the first one has a higher priority. The system will then auto search the matched subtitle to play. -
Page 68: Preferred Audio
USER’S MANUAL Hard Hearing Setting 7.3.3 Preferred Audio The Preferred Audio item is used to set the default audio language. When a program has audios of multiple languages, the system will auto search the matched audio to play according to the settings here. Two preferred audios can be set and the first one has a higher priority. -
Page 69: Pvr Config
USER’S MANUAL 7.3.4 PVR Config Through the PVR Config item you can do some settings on Timeshift and Record functions. See the figure below for the PVR Config setting menu. PVR Config Setting PVR File Format: Set the format of record files (MPEG2 files), TS or PS. ... -
Page 70: Spdif
USER’S MANUAL AV Setting 7.3.6 SPDIF The SPDIF item is to set the output format of digital audios. After highlighting this item, press OK key to pop out an option list, see the figure below: SPDIF The list has three options: PCM, Bitstream and Mute. -
Page 71: Aspect Ratio
USER’S MANUAL 7.3.7 Aspect Ratio The Aspect Ratio item is to set the proportion between the length and width of output videos. After highlighting this item, press OK key to pop out an option list, see the figure below: Aspect Ratio The list has four options: 16: 9, Full Screen, 4: 3 LB (Letter Box) and 4: 3 PS (Pan Scan). -
Page 72: Video Resolution
USER’S MANUAL Video Output The list has three options: CVBS, RGB and YUV. 7.3.9 Video Resolution The Video Resolution item is to set the resolution (up to 1080p_60 (Full HD)) and refresh rate of video output. After highlighting this item, press OK key to pop out an option list, see the figure below: Video Resolution... -
Page 73: Hdmi Color Space
USER’S MANUAL The list has following options (‘p’ indicates progressive scan; ‘i' indicates interlaced scan): Auto Detect 480p_60, 480i_30 576p_50, 576i_25 720p_60, 720p_50 1080p_60, 1080p_50, 1080i_30, 1080i_25 7.3.10 HDMI Color Space The HDMI Color Space item is to set the color coding method of video output. After highlighting this item, press OK key to pop out an option list, see the figure below: HDMI Color Space The list has four options: xvColor, RGB, YCbCr 4:2:2 and YCbCr 4:4:4. -
Page 74: Hdmi Deep Color
USER’S MANUAL 7.3.11 HDMI Deep Color The HDMI Deep Color setting determines the depth of colors of HDMI output. After highlighting this item, press OK key to pop out an option list, see the figure below: HDMI Deep Color The list has three options: 8 Bits, 10 Bits and 12 Bits. 7.3.12 Ethernet Config Through the Ethernet Config item you can carry out Ethernet related settings. - Page 75 USER’S MANUAL Ethernet Config Link Type: Select to use either Wire Network or Wireless Network. Config: Select the network connection method. After entering this item, network connection methods and related information can be found (see the figure below). In which, the first item, Config Mode, is to select a network connection method.
- Page 76 USER’S MANUAL If the Static IP method is chosen, the IP Address, Netmask, Gateway and DNS Server items will become active (see the figure below). Users can establish the network connection by giving these parameters. Ethernet Config Static IP After setting, press EXIT key to return to the Ethernet Config menu.
-
Page 77: Factory Reset
USER’S MANUAL Ping Test Preferred Storage: When there are several storage devices connected, you can through this item select one of them to store network data while in Network Mode. MAC Address: Not configurable, showing the MAC address of the network adapter ... -
Page 78: Multimedia Setting
USER’S MANUAL Version 7.3.15 MultiMedia Setting Through the MultiMedia Setting item you can set related MultiMedia settings. Highlight the MultiMedia Config item in the Setting menu and then press OK or RIGHT keys to enter the MultiMedia Config menu. This menu has ten items, see the figure below: MultiMedia Setting... -
Page 79: Mp4 Subtitle Language
USER’S MANUAL 7.3.15.1 MP4 Subtitle Language The MP4 Subtitle Language item is to set the video language,In this list, you can press UP/DOWN keys to select a language and then press OK key to confirm. See the figure below: MP4 Video Subtitle Language Setting 7.3.15.2 MP4 Subtitle CodePage The MP4 Subtitle CodePage item is to set encode mode of MP4 subtitle,In this list, you can press UP/DOWN keys to select a style and then press OK key to confirm. -
Page 80: Ebook Language
USER’S MANUAL MP4 Subtitle Encoded Mode Setting 7.3.15.3 EBook Language EBook Language item is to set the language to show the content of the EBook, you can press UP/DOWN keys to select a language and then press OK key to confirm. See the figure below: Ebook Language Setting... -
Page 81: Ebook Codepage
USER’S MANUAL 7.3.15.4 EBook CodePage EBook CodePage like MP4 Subtitle CodePage 7.3.15.5 MovieRepeat.MusicRepeat and PhotoRepeat MovieRepeat.MusicRepeat and PhotoRepeat items is to select play type, press UP/DOWN keys to select a play mode and then press OK key to confirm. See the figure below: 7.3.15.6 BGmusic BGmusic item is to enable you to listen to music if you exit music UI after starting playing process,see the figure below:... -
Page 82: Slide Time
USER’S MANUAL 7.3.15.7 Slide Time Slide Time item is to set the interval of each photos,press UP/DOWN keys to select one item and then press OK key to confirm. See the figure below: 7.3.15 Effect item Effect item is to set the effects of the photos,press UP/DOWN keys to select a effect and then press OK key to confirm. -
Page 83: Utility
USER’S MANUAL 7.4 Utility The Utility menu has three items: Timers, and SmartCard. 7.4.1 Timers Through the Timers item, you can manage scheduled programs. In the Timers menu you can view and edit the scheduled program’s name, start time, schedule type and so on. See the figure below: Timer List In the above figure the fields from left to right are: Timer No., Program Name, Date, Time,... - Page 84 USER’S MANUAL Timer Edit Date: Scheduled date. To edit it, highlight the Date item first and then press RIGHT key to enter its editing state. Program Name: Scheduled program. To edit it, highlight the Program Name item first and then press RIGHT key to enter its editing state.
-
Page 85: Game
USER’S MANUAL Type: Schedule type. Five options: Recorder, VCR, On, Channel and Standby. Recorder: The system will record the scheduled program when the scheduled time is reached. Users can select whether or not to record AD, TTX and Subtitle. ... -
Page 86: Tetris
USER’S MANUAL Box Man After entering this game, press UP/DOWN keys to select a function button: New Game: Start a new game. Reset: Restart the current game. Continue: Continue the current game. Level: Set game difficult level. ... -
Page 87: Hit Rat
USER’S MANUAL Tetris Game control keys: UP key: Change the shape of falling squares. LEFT/RIGHT keys: Move the falling squares left or right. DOWN key: Speed up the falling squares. OK key: Pause the game. EXIT key: Exit the game. -
Page 88: Go Bang
USER’S MANUAL Hit Rat Game control keys: 0~9 keys: Hit the rat that appears at corresponding position. OK key: Pause the game. EXIT key: Exit the game. 7.5.4 Go Bang The Go Bang game is also called Black-and-White Chess game. The winner is the first party who places 5 stones in a line. -
Page 89: Sodoku
USER’S MANUAL Go Bang Game control keys: UP/DOWN/LEFT/RIGHT keys: Select a position to place a stone. OK key: Place a stone. EXIT key: Exit the game. 7.5.5 Sodoku The Sodoku game interface is as below:... - Page 90 USER’S MANUAL Sodoku Game control keys: UP/DOWN/LEFT/RIGHT keys: Select a position to fill with a number. OK key: Function select (such as RESET, NEW). 0~9 key: Enter a number at the selected position. EXIT key: Exit the game.
-
Page 91: Record & Timeshift
USER’S MANUAL 8 RECORD & TIMESHIFT Record In full screen mode, if you want to record the being-played program, just press REC key. If there is no USB device or card inserted, corresponding message will appear. See the figure below: No USB (CARD) Device Prompt ... - Page 92 USER’S MANUAL Initializing USB (CARD) Device During recording, to pause the recording, press PAUSE key. During recording, to stop recording, press STOP key. A confirmation dialog will appear. See the figure below. Stop Recording During recording, pressing INFO key can show the recording information. Pressing INFO key again will show the record file list.
-
Page 93: Timeshift
USER’S MANUAL Record List 8.2 Timeshift The Timeshift function is to play the programs that have already been played just before. At present there are three methods to start the Timeshift function, which can be set through Main Menu -> Preference -> PVR Config. See the figure below: Timeshift Setting Three options of the Timeshift item:... -
Page 94: Timeshift: Auto
USER’S MANUAL Auto: Auto start the Timeshift function 5 seconds after entering any channel. Pause: During full-screen playing, press PAUSE key to start the Timeshift function. Off: During program recording, press PAUSE or FR keys to start the Timeshift function. 8.2.1 Timeshift: Auto If you choose the ‘Auto’... -
Page 95: Upgrade
USER’S MANUAL 9 UPGRADE You can carry out system software upgrade through Main Menu -> Upgrade. See the figure below: Upgrade At present the system supports three methods to upgrade the system software: USB Upgrade, OTA Upgrade and NET Upgrade. USB/Card Upgrade Highlight the USB Upgrade item and then press OK key to enter the following USB Upgrade interface. - Page 96 USER’S MANUAL USB Upgrade Select the partition in which rom.bin is stored, then press OK key to enter a file list. From the file list, select rom.bin and then press OK key to start the USB upgrade. The interface will be as below: USB Upgrade Flow When the USB Upgrade completes, the system will auto restart.
-
Page 97: Ota Upgrade
USER’S MANUAL 9.2 OTA Upgrade See below: OTA Upgrade Setting Setting items: Satellite: Select currect satellite that carried new software: Frequency,Symbol Rate and Polarisation: Input current value . Download PID: the new software PID. OTA Upgrade: Hightlight this item and press OK key to start OTA Upgrade. The interface like USB Upgrade.. -
Page 98: Ftp Upgrade
USER’S MANUAL 9.3 FTP Upgrade See below: FTP Upgrade Setting Setting items: FTP Server, Port: Select valide FTP site and service port: User, Password: Input currect user id and password. Link: Hightlight this item and press OK to linked FTP site..and select new sw to upgrade.