Samsung GT-I9305 User Manual page 138

›
Make a purchase with the NFC feature
Before you can use the NFC feature to make payments, you
must register for the mobile payment service. To register or
get details about the service, contact your service provider.
1
Touch the back of your device to the NFC card reader.
2
When prompted, enter your PIN and touch your device to
the NFC card reader again (if necessary).
›
Send data via Android Beam
With the Android Beam feature, you can send data, such as
webpages and contacts, to NFC-enabled devices.
1
In the application list, select Settings
NFC.
2
Drag the Android Beam switch to the right.
3
Open a webpage or select an item from an appropriate
application.
4
Touch the back of your device to the back of the other
device.
5
Tap your device's screen.
The data on your device will be sent and displayed on the
screen of the other device.
›
Send data via S Beam
With the S Beam feature, you can send data, such as music,
videos, images, and documents.
Do not send copyright-protected data via S Beam.
Doing this may violate copyright laws. Samsung is not
responsible for any legal issues caused by the user's
illegal use of copyrighted data.
→
Tools
138
More settings →