Samsung PX5ISDBA E-Manual page 73

How to set up using Plug & Access function
Turn on the power of AP and TV.
1. Insert USB memory stick into our Samsung wireless APs and checking AP's
PDP status (Blinking → On).
2. Then take USB memory out and insert your USB memory into Samsung TV.
3. Wait until the connection is automatically established.
If
Plug & Access
N
appears on the screen notifying you of the failure. If you want to try using
◀
Plug & Access
adapter and then try again from Step 1. You can also choose one of the
other connection setup methods.
does not connect your TV to your AP, a pop-up window
a gain, reset the AP, disconnect the Samsung Wireless LAN
English
▶