Black & Decker GS2400 Instruction Manual page 19

FEATURES
1. On/off switch
2. Direction selector
3. Overload protection button
4. Funnel
5. Stand
6. Collection bag
7. Adjustment knob
WARNING!
Before assembly, make sure that the tool is switched off and unplugged.
ASSEMBLING THE STAND (FIG. A1 - A3)
WARNING!
Seek assistance when fitting the stand. The appliance is too heavy to be handled by one person.
• Turn the appliance upside down and place it on the floor.
• Align the holes in the support legs with those in the appliance. Match the leg mark with the mark on the housing.
- Left leg nozzle mark "L".
- Right leg nozzle mark "R".
• Secure the legs on the appliance using the Allen screws (13), the spring washers (14) and the saddle washers (15)
as shown (fig. A1).
• Slide the end frame (8) over the right leg (10) and left leg (9).
• Secure the end frame using the screw (11) and the lock washer (12).
• Align the holes in the wheel shaft (16) with those in the stand (fig. A2).
• Secure the wheel shaft with the saddle washers (15), spring washers (14) and the Allen screws (13) as shown.
Fitting the wheels (fig. A3)
• Fit the wheel (17) on the wheel shaft (16).
• Secure the wheel with the flat washer (18), the spring washer (14) and the Allen screw (19).
• Fit the wheel cover (20) by clicking it on the wheel.
• Repeat the above procedure for the other wheel.
Fitting the collection bag (fig. B)
• Place the collection bag (6) under the outlet opening asshown.
• Fit the handles of the collection bag over the hooks (21).
USE
WARNING!
Let the tool work at its own pace. Do not overload.
• Do not switch the appliance off before it is completely empty, as it may clog and be difficult to restart.
• Remove soil and stones from plant roots before shredding.
• Firmly hold branches when feeding them into the shredder.
Switching on and off (fig. C)
Switching on
• Set the direction selector (2) to left position.
• Press the I button of the on/off switch.
ASSEMBLY
19
ENGLISH