USER MANUAL CVD – 144 Distribution Amplifier 244 Bergen Boulevard, West Paterson, NJ 07424 • Tel 9737854347 • FAX 9737853318 • Web www.fsrinc.com 43856 LIT1003...
PROPRIETARY INFORMATION All information in this manual is proprietary to and the property of FSR inc. This publication is protected by the Federal Copyright Law, with all rights reserved. No part of this document may be reproduced, transcribed, or transmitted, in any form or by any means, without prior explicit written permission from FSR inc.
Page 3
Operators Safety Summary The general safety information in this summary is for operating personnel. Do Not Remove Covers or Panels There are no user-serviceable parts within the unit. Removal of the top cover will expose dangerous voltages. To avoid personal injury, do not remove the top cover.
Page 4
INTRODUCTION The CVD - 144 is the world’s first configurable Distribution Amplifier (D/A). Four independent 1 x 4 D/A’s are integrated within the 1RU chassis. What makes the CVD-144 unique is the ability to bridge adjacent 1x4 blocks to make a larger D/A.
TECHNICAL SPECIFICATIONS • 400 MHz video bandwidth • All metal enclosure • Four bridgeable 1x4 D/A Blocks • Blocks Rack mount ears included • All outputs are fully buffered • Universal worldwide power supply Video Gain: Unity (into 75 ohm load) Bandwidth: >400MHz (+0.1db/-3db) measured from input connector to output connector within a block, all outputs connected.
CONNECTING THE UNIT DESCRIPTION OF INPUTS AND OUTPUTS All video input and output connections are BNC female chassis mount connectors. They will accept anlog video in NTSC, PAL, or SECAM formats. The power cord entry accepts the supplied IEC power cordset at 110/220 VAC 50/60 Hz. Typical configuration options are illustrated on the following pages.
TYPICAL INSTALLATION TYPICAL “COMPOSITE” VIDEO APPLICATION Video Camera VCR OR DVD VCR OR DVD PLAYER PLAYER Monitor Projector Monitor t i n Monitor Monitor Monitor Monitor t i n Monitor Monitor Projector Monitor Projector Monitor Projector LINK LINK LINK DISTRIBUTION AMP 1 DISTRIBUTION AMP 2 DISTRIBUTION AMP 3 DISTRIBUTION AMP 4...
FSR factory or Authorized Repair Stations. This warranty shall be cancelable by FSR at its sole discretion if the unit has been subjected to physical abuse or has been modified in any way without written authorization from FSR. FSR’s liability under this warranty is limited to repair or replacement of the defective unit.
Need help?
Do you have a question about the CVD – 144 and is the answer not in the manual?
Questions and answers