Canon MD255 Instruction Manual page 62

External Connections
4
When the scene you wish to
record appears, push the joystick
( ) toward
recording.
Recording starts.
5
While recording, push the joystick
( ) toward
In record pause mode, push the
joystick ( ) toward
resume recording.
6
Push the joystick (
stop recording.
7
Connected device: Stop the
playback.
IMPORTANT
• Blank sections may be recorded as
anomalous picture.
• If the picture does not appear,
disconnect the DV cable and restore the
connection after a short while or turn the
camcorder off and then on again.
• Do not connect any devices to the
camcorder's USB terminal while an
external device is connected to the DV
terminal.
• You can only record video signals in DV
standard (standard definition, SP or LP
mode) from devices carrying the
logo. Note that signals from identically
shaped DV (IEEE1394) terminals may be
in different video standards.
Downloaded From VideoCamera-Manual.com Manuals
62
/ to begin
/ to record pause.
/ again to
) toward to
NOTES
We recommend powering the camcorder
using the compact power adapter.
Concerning Copyright
Copyright Precaution
Certain pre-recorded video tapes, films
and other materials, as well as some
television programs are copyrighted.
Unauthorized recording of these materials
may violate copyright protection laws.
Copyright Signals
During playback: If you try to play back a
tape that contains copyright control
signals for protection of software,
"COPYRIGHT PROTECTED PLAYBACK IS
RESTRICTED" appears for a few seconds
and the camcorder displays a blank blue
screen. You cannot play back the contents
of the tape.
During recording: If you try to record from
software that contains copyright control
signals for protection of software,
"COPYRIGHT PROTECTED DUBBING
RESTRICTED" appears. You cannot
record the contents of the software.
You cannot record copyright protection
signals to a tape using this camcorder.