Table of Contents
Advertisement
connecting & setting up
Case 2 : Connecting to a TV with DVI Jack
•
Using the DVI Adapter cable (not supplied), connect the HDMI OUT jack on the rear of the HDD & DVD
Recorder to the DVI IN jack of your TV.
•
Using the audio cables, connect the AUDIO (red and white) OUT jacks on the rear of the HDD & DVD
Recorder to the AUDIO (red and white) IN jacks of your TV. Turn on the HDD & DVD Recorder and TV.
•
Press the input selector on your TV remote control until the DVI signal from the HDD & DVD Recorder
appears on your TV screen.
Red
J
To use HDMI cable, make the Audio/Video connection before plugging in the power cord or after fi nishing the "Plug
& Auto Setup." Do not connect the HDMI cable while the "Plug & Auto Setup" is progressing.
Progressive scan automatically activates when HDMI is connected.
If TV/HDMI Receiver does not support DTS, Audio output is not available when you play disc in DTS format.
You can switch from the HDMI output to other output only in stop mode.
If you use an HDMI cable to connect a Samsung TV to the HDD & DVD Recorder, you can operate the recorder using
the TV remote control.
(This is only available with SAMSUNG TVs that support Anynet+(HDMI CEC).) (See pages 39~40)
Please check the n logo (If your TV has an n logo, then it supports Anynet+ function.)
M
HDMI (High Defi nition Multimedia Interface)
HDMI is an interface to enable the digital transmission of video and audio data with just a single connector. Since
HDMI is based on DVI, it is completely compatible with DVI. The only difference between HDMI and DVI is that HDMI
supports multi-channel audio. Using HDMI, the HDD & DVD Recorder transmits a digital video and audio signal and
displays a vivid picture on a TV having an HDMI input jack.
Downloaded From Disc-Player.com Samsung Manuals
30_ connecting & setting up
White
Advertisement
Table of Contents
