Connecting To The Pc - ProNav PNN350 User Manual

Connecting your ProNav to your computer
Please then turn your ProNav on and wait for the main screen to load up. Then, using the USB lead provided in the box, connect one end to
the USB slot on your PC and the other Mini USB connector into the side of your ProNav. After approximately 3 seconds your ProNav will
automatically connect to your computer and you will be presented with the image shown below:
Once you have finished installing any necessary updates please be sure to safely remove your ProNav from your PC. If you do not safely
remove your ProNav you may risk damaging it. To safely remove please click on the arrow which is located next to the time display on your
computer screen and select safely remove hardware. Once you are prompted you can now disconnect the ProNav from the computer.
33