Sony SLV-D360P Service Manual page 14

Hookup 2 : DVD-VCR setup
Plug the DVD-VCR into an AC outlet.
The DVD-VCR automatically presets the DVD-VCR's clock and TV channels
when the DVD-VCR is plugged into the AC outlet.
to AC outlet
AC power cord
The DVD-VCR starts presetting the
clock and channels.
When Auto preset is completed, the
current time appears in the display
window.
You have now completed DVD-VCR setup.
To change the on-screen display language to French or Spanish, see
"Step 4 : Selecting a language" on page 20.
The clock is set using a time signal provided by some TV channels. If the clock
is incorrect, or "–:–" appears in the display window, see "Using Manual Clock
Set" on page 24.
To add or disable channels manually, see "Presetting/disabling channels
manually" on page 28.
Notes
• If you connect the AC power cord before the antenna connections are completed, the channels
may be incorrectly set. If this happens, see "Step 6 : Presetting channels" on page 26.
• Do not press any buttons on the DVD-VCR or remote commander during Auto preset.
• Auto preset starts automatically only when you plug in the AC power cord for the first time
after you purchase the DVD-VCR.
• Auto preset can be performed by pressing x on the unit continuously for 5 seconds or more
with the DVD-VCR power turned off.
18
Basic hookups
Step 4 : Selecting a language
You can change the on-screen display
language.
Before you start...
• Turn on the DVD-VCR and your TV.
• To control the DVD-VCR, set TV /
DVD·VIDEO to DVD·VIDEO on the
remote (page 10).
• Set the "RF Output Channel" to "3CH" or
"4CH" in "OPTION SETUP" menu
(page 110). If your TV is connected to the
DVD-VCR using A/V connections, set the
TV to video input.
• If the DVD player is in play mode, you
cannot display the setup menu. Stop the
DVD playback.
1 Press SET UP, then press V/v to select
(OPTION) and press ENTER.
2
Press V/v to select "Language", then press
ENTER.
The "LANGUAGE/IDIOMA/LANGUE"
menu appears.
3 Press V/v to select the desired language, English, Spanish or French, then
press ENTER.
20
Selecting a language
Hookup 3
Connecting a cable box with many scrambled channels
Recommended use
Use this hookup if your cable system scrambles all or most channels.
What you can do with this hookup
• Record any channel by selecting the channel on the cable box
What you cannot do
• Record with the cable box turned off
• Record one channel while watching another channel
Wall
After you have completed hookup...
After you have completed hookup, plug the DVD-VCR into an AC outlet and see
"Step 4 : Selecting a language" on page 20.
4
SET UP
V/v
ENTER
OPTION SETUP
Language :English
Clock Set/Adjust
Channel Setup
Auto Power Off [ Off ]
RF Output Channel [3CH]
V v ENTER RETURN SET UP
LANGUAGE/IDIOMA/LANGUE
B English
Español
Français
V v ENTER RETURN SET UP
1-4
Cable box
Rear of TV
VHF/UHF
A
Match the type of
connector on your
TV: A, B, or C.
or
VHF
B
For connector
UHF
or
types B and C, no
UHF connection
VHF
is required.
DVD-VCR
C
UHF
to AC outlet
AC power cord
Press SET UP to exit the menu.
19
Basic hookups
21
Selecting a language