Nokia 808 PUREVIEW Service Manual page 14

13) Remove the USB BOOT with fingers.
15) Place the camera removal tool SS-284 on
bottom of the CAMERA. While lifting the SS-284
up, push the CAMERA with a finger through the
ENGINE BOARD.
17) Use the SS-93 to open the CARD CONNECTOR.
Be careful not to damage the connector or any
nearby components.
14 Nokia I nternal Use Only | Copyright © 2012 Nokia | A ll rights reserved
Nokia 808 PureView (RM-807)
14) Use the SS-93 to open the CAMERA
CONNECTOR. Be careful not to damage the
connector or any nearby components.
16) Remove the CAMERA.
18) Remove the CARD CONNECTOR PWB with the
CARD CONNECTOR SPACER.
L1L2 Service Manual
Version 3.0