Page 2
LNB 22KHz Control ON / OFF, AUTO 5.1.4.5 DiSEqC Version Input Voltage 90-240 Volts, 50/60 Hz Power Consumption 30 Watts Dimensions 300mm (W) x 237mm (D) x 58mm (H) Digital Satellite Receiver SMP-6200 数 位 卫 星 解 码 器 SMP-6200...
Page 3
Exit key to exit current menu. Delete key to delete announcement. Announcement Main Menu System Information Announcement Num [ 0 / 0 ] Date Page EXIT Exit Erase Digital Satellite Receiver SMP-6200 SMP-6200 数 位 卫 星 解 码 器...
Page 4
CRC Part BIN21RD Ver 3.1q BIN21RD Ser 0001 Sign Date 26/07/2007 Dload Date 28/07/2007 Sign Time 22:43:15 Inage Size 2116908 Dload Time 09:07:04 Dload Dur 00:04:56 EXIT Exit Digital Satellite Receiver SMP-6200 数 位 卫 星 解 码 器 SMP-6200...
Page 6
Press OK key to set selected channel as power up channel. The confirm message box will then be displayed. Select “Yes” to confirm or “No” to cancel. Press TV/R key to switch between TV and Radio. Digital Satellite Receiver SMP-6200 数 位 卫 星 解 码 器 SMP-6200...
Press EPG key while in Timer menu to switch to EPG menu. POWER ON/OFF Press Exit key to cancel and exit current menu. ** Please keep SMP-6200 standby after setting to run timer function. Digital Satellite Receiver SMP-6200 数 位 卫 星 解 码 器 SMP-6200...
Page 8
MENU Time Setting A/V Output Message Box CH+ CH- Parent Control Please input Your Password VOL+ VOL- Timer XXXX MUTE Power Up Channel TELETEXT Move Select EXIT Exit Digital Satellite Receiver SMP-6200 数 位 卫 星 解 码 器 SMP-6200...
Page 9
Exit 5.1.3.2 A/V Output A/V Output Main Menu System Setting Menu Language English Brightness Color TV Screen AUTO TV Type Volume Control Transparent Move Left/Right EXIT Exit Save Digital Satellite Receiver SMP-6200 数 位 卫 星 解 码 器 SMP-6200...
Page 15
Start Scan Press OK key on remote to create a user channel according to inputted PID parameters or press Exit key to exit the menu after done setting. Digital Satellite Receiver SMP-6200 数 位 卫 星 解 码 器 SMP-6200...
Page 18
Set scan mode to “FTA,” only free-to-air channels will be downloaded. Press Blue key on remote to return to antenna setting menu. Press OK key on remote to get into TP search menu. Digital Satellite Receiver SMP-6200 数 位 卫 星 解 码 器 SMP-6200...
Page 19
Press Blue key on remote, it will directly get into manual search menu. Press Green key on remote, it will directly get into auto search menu. Press Red key on remote, it will call up the list under certain function. Digital Satellite Receiver SMP-6200 数 位 卫 星 解 码 器 SMP-6200...
Page 20
删 除 22KHz 4.10700 DiSEqC 5.10750 Fixed Dish 6.11200 EXIT 选 择 退 出 上 下 移 动 Enter List Auto Search Move Save EXIT Select Exit Manual Search Digital Satellite Receiver SMP-6200 数 位 卫 星 解 码 器 SMP-6200...
Page 21
It shows the satellite name. User can select the satellite name by pressing keys. The total number is 9. 移 动 刪 除 重 命 名 EXIT 选 择 退 出 上 下 移 动 Digital Satellite Receiver SMP-6200 数 位 卫 星 解 码 器 SMP-6200...
Page 23
Galaxy 10R mail message, announcement, and all details of the upgraded software. Nahuel 1 Telstar 12 上 下 移 动 EXIT 左 右 移 动 退 出 刪 除 Digital Satellite Receiver SMP-6200 数 位 卫 星 解 码 器 SMP-6200...
Page 24
Figure 4 – Remote Control Unit Range AUTO 显 示 制 式 关 音 量 控 制 透 明 度 上 下 移 动 左 右 移 动 EXIT 退 出 保 存 Digital Satellite Receiver SMP-6200 数 位 卫 星 解 码 器 SMP-6200...
Page 25
This key is used to toggle in or out of muting EXIT 选 择 退 出 上 下 移 动 MUTE mode. Display teletext, if there is teletext information TELETEXT in stream. Digital Satellite Receiver SMP-6200 数 位 卫 星 解 码 器 SMP-6200...
Page 26
RF signal output to TV NTSC CH3-4 RF IN RF signal input from ANT or CATV system EXIT AC 90-240V AC power cord 50Hz/60Hz EXIT POWER Receiver power switch Digital Satellite Receiver SMP-6200 数 位 卫 星 解 码 器 SMP-6200...
Page 27
To enter the next lower level submenu or to 上 下 移 动 EXIT 选 择 退 出 confirm the parameter value entered. TV/R 电 视 广 播 切 换 (TV/R) Digital Satellite Receiver SMP-6200 数 位 卫 星 解 码 器 SMP-6200...
Page 28
全 球 服 务 站 点 数 据 流 组 成 状 态 ECMI: 监 控 ECMI: 国 籍 When the receiver is inoperative, please consult the EXIT 退 出 Customer Support. Digital Satellite Receiver SMP-6200 数 位 卫 星 解 码 器 SMP-6200...
Need help?
Do you have a question about the SMP-6200 and is the answer not in the manual?
Questions and answers