Selective Ride Control - Buick 2017 LaCrosse Getting To Know Manual

Electronic Precision Shift
The automatic transmission shift lever always starts in a center position, represented by
a dot on the shift pattern displayed on top of the shift lever. The selected gear position
illuminates in red. After shifting, the shift lever returns to the center position.
Park – Press the button on top of the lever to shift into Park.
The vehicle will not shift out of Park unless
the ignition is on, the brake pedal is applied,
and the button on the side of the lever is
pressed.
Reverse – Press the button on the side of the
lever and move the lever forward and then
left to shift into Reverse.
Neutral – Move and hold the lever forward
for 1/2 second to shift into Neutral.
Note: The transmission will not stay in Neutral for
an extended period. It will automatically shift
into Park.
Drive – Move the lever rearward to shift into Drive.
Tap Shift Mode – With the transmission in Drive, pull back on the lever to activate Manual
Mode. Press the left steering wheel paddle to downshift and the right paddle to upshift.
Pull back on the lever again to return to Drive.
Automated Car Wash Mode
To place the transmission in Neutral with the engine running:
1. While pressing the brake pedal, open the driver's door and then shift to Neutral.
2. The indicator should show N. If it does not, select Neutral again.
3. Upon returning to the vehicle, shift into Park.

Selective Ride Control

Selective Ride Control automatically adjusts
the suspension and steering settings in real
time. There are two driving modes.
TOUR – Default mode used for normal city
and highway driving.
SPORT – Press the SPORT button on the
center of the instrument panel when road
conditions or personal preference demands
more responsive, controlled steering and
handling. Press the button again to return to Tour mode.
F
Optional equipment
F
See Driving and Operating in your Owner Manual.
See Driving and Operating in your Owner Manual.
13