For cleaning the microphone body and basket use a soft, damp cloth. If necessary use a mild cleansing agent. No solvent agents should be used. Take care not to allow any water into the microphone. Service In the unlikely event of equipment failure, kindly contact your Studiomaster Professional Dealer/Distributor.
Page 3
Frequency Response Curve Flat Mode Low Cut Mode SM 600XLR 0° 180° -7dB Mode Polar Pattern...
Page 4
Technical Specifications: Dynamic Transducer type Dynamic mic style Operating principle 30Hz~16KHz Frequency response -50dB ±3dB(at 1KHz) Sensitivity -7dB(at 1KHz) Sensitivity Pad -5dB(at 100Hz) Low Frequency Pad Super-Cardiod Polar pattern 15dB Rear attenuation at 1 kHz 3.16mV Open circuit voltage at 1 kHz 350 O ±30% Nominal impedance 3-pin XLR male...
Need help?
Do you have a question about the SM 600XLR and is the answer not in the manual?
Questions and answers