Hotel Mode - Panasonic TH-42PA50E Service Manual

Digital progressive wide plasma television
Hide thumbs Also See for TH-42PA50E:
Table of Contents

Advertisement

12 Hotel mode

1. Purpose
Restrict a function for hotels.
2. Access command
· Enter to the Service 2 Mode.
· Press Status button on remote control and entry to the
EAROM EDITOR Mode.
· Set the data of EEPROM(ADDRESS 140) to 80.
· Press the OK button to memorize the data.
Push the Power switch(button) off/on the set(the remote
control) to turn the set off/on.
It can be made Hotel mode.
3. Exit command
· First, set the data of EEPROM(ADDRESS 140) to 00.
Next, Push the Power switch(button) off/on the set(the
remote control) to turn the set off/on.
Then, it is no longer hotel mode.
4. Access command to the Hotel mode setup menu
· <Prerequisite> : It is conditions that the data of
EEPROM(ADDRESS 140) is 80.
In order to display the Hotel mode setup menu, please
enter the following command (within 2 second).
[TV]:down + [REMOTE]:TV/AV(3 times)
Then, the Hotel mode setup menu is displayed.
5. Explain the Hotel mode setup menu
CAUTION
This
setup
is
EEPROM(ADDRESS 160) will be C0, even if each
settings were done.
not
valid,
unless
data
item
Initial INPUT
Select input signal modes.
Set this signal, each time power is switched on.
<Selection> :
Off/TV/AV1/AV2/AV2S/AV3/Av3S/AV4/Av4S/AV4
C/PC
· Off: give priority to a last memory. However,
· AVnS/AVnC: only Euro model selectable
· PC: selectable with VGA option
Initial VOL level
Adjust output Volume.
Set this volume, each time power is switched on.
If the value of InitVol is changed, volume will
change. However, priority is given to a last
memory when InitVol is Off. When "InitVol" is
larger than "MaxVol", make "InitVol" and "MaxVol"
the same.
<Selection/Range> :
Off/0 to 100
· Off: give priority to a last memory
Maximum VOL
Adjust maximum volume.
level
Set this max. volume, each time power is
switched on.
When "MaxVol" is smaller than "InitVol", make
"MaxVol" and "InitVol" the same, if "InitVol" is not
Off.
<Range> :
0 to 100
Initial POS
Select programme number.
Set this programme number, each time power is
switched on.
<Selection> :
Off/0 to 99 (Euro model)
· Off: give priority to a last memory
Button lock
Select local key conditions.
Set this condition, each time power is switched
on.
<Selection> :
Off/SETUPMENU/All
· Off: altogether valid
· SETUP: restrict F-key selection
· MENU: restrict F-key selection
· All: altogether invalid.
Remote lock
Select remote control key conditions.
Set this condition, each time power is switched
on.
<Selection> :
Off/SETUP/MENU
· Off: altogether valid
· SETUP: only Setup menu is invalid
· MENU: Picture/Sound/Setup menu are invalid
of
35
TH-42PA50E / TH-42PE50B / TH-37PA50E / TH-37PE50B
Function
Euro model is compulsorily set to TV.
(Tuning guide(menu) can not be selected.)
(only Volume/Mute can be selected.)

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Th-42pe50bTh-37pa50eTh-37pe50b

Table of Contents