H-Star SS-90X Owner's Manual page 10

PANEL CONTROLS
8
FUNCTION
8.
FUNCTION - The FUNCTION button is used to access the function menu. The function menu can be
used to adjust or change the parameters of a number of settings. The reverb level, chorus level, touch,
, split point, tuning etc. are all set from the function menu.
Please see the Function section of this manual for more information.
9.
PAGE - The PAGE buttons (up and down) are used to access the different menus in the Function
feature. When the FUNCTION button has been pressed use the PAGE Down or PAGE Up buttons to
access the Function menu selections.
10.
USER REG - Registration is used to store keyboard settings. Press the USER REG button to engage
the registration memory mode. There are two keyboard memory settings. See Registration Section of
this manual for more information.
11.
ENTER KEYS - Use the +/YES, –/NO buttons directly while using the voice or function settings. These
buttons are also used to access or alter many of the function features or when input is necessary.
12.
REVERB - The reverb effect is engaged automatically when the power is turned on. Reverb simulates
the effect of playing in a big room or hall where the sound reverberates off the walls and ceiling. Press
the REVERB button to turn off the reverb effect. You can switch the reverb feature on and off by
pressing the REVERB button. Reverb depth can be changed in the function menu.
Please see the Function Section for more information.
13.
CHORUS - The Chorus effect adds depth and spaciousness to the selected keyboard voice. Press the
CHORUS button to engage the chorus effect and the indicator will light up. Press the button again to
turn off the chorus effect. Chorus depth can be changed in the function menu.
Please see the Function Section for more information.
14.
LAYER - Engaging the LAYER button will put the keyboard in the layer mode. Layer refers to an addi-
tional voice that is "tone mixed" with the selected keyboard voice. The assigned layer voice will be
heard together with the original voice. To select a new layered instrument voice use the +/YES or –/
NO buttons within 3 seconds after the LAYER button has been engaged.
15.
LOWER - With the Lower feature engaged the keyboard operates in the "split" mode. In the Lower mode
the keyboard is divided into two sections. In the right hand section the original and/or layered voice will
sound, and in the left hand section a different voice can be assigned to sound when the keys are
played. To select a new Lower instrument voice use the +/YES or –/NO buttons within three seconds
after the LOWER button has been engaged.
9
PAGE
PAGE
REVERB
11
+ / YES
12
- / NO
10
CHORUS
13
USER REG
10
LAYER
14
LOWER
15