Samsung HW-F750 User Manual page 21

POWER TV POWER POWER
TV POWER
AUTO
POWER SPEAKER TV SOURCE
SOURCE
SoundShare
REPEAT
AUTO
POWER
SOURCE SPEAKER TV SOURCE
TV VOL TV CH AUDIO SYNC
TV MUTE TV INFO TV PRE-CH VT DIMMER
SoundShare
SOUND EFFECT SMART VOLUME
VOL REPEAT
S/W S/W
MUTE
LEVEL LEVEL
VOL
3D SOUND DRC
PLUS
TV VOL TV CH AUDIO SYNC
AH59-02545A
POWER
POWER TV POWER
TV POWER
AUTO
SOURCE POWER SPEAKER TV SOURCE
SoundShare
REPEAT
AUTO
POWER
SOURCE SPEAKER TV SOURCE
TV VOL TV CH AUDIO SYNC
TV MUTE TV INFO TV PRE-CH VT DIMMER
SoundShare
SOUND EFFECT SMART VOLUME
REPEAT
VOL
S/W S/W
MUTE
LEVEL LEVEL
VOL
3D SOUND
DRC
PLUS
TV VOL TV CH AUDIO SYNC
AH59-02545A
POWER TV POWER
AUTO
POWER SPEAKER TV SOURCE
SOURCE
SoundShare
REPEAT
SOUND EFFECT SMART VOLUME
VOL
TV VOL TV CH AUDIO SYNC
TV MUTE TV INFO TV PRE-CH VT DIMMER
SOUND EFFECT SMART VOLUME
VOL
S/W S/W
MUTE
LEVEL LEVEL
S/W S/W
MUTE
LEVEL LEVEL
VOL
3D SOUND DRC
PLUS
VOL
3D SOUND
AH59-02545A DRC
PLUS
TV MUTE TV INFO TV PRE-CH VT DIMMER
POWER TV POWER
AUTO
POWER
SOURCE SPEAKER TV SOURCE
SoundShare
REPEAT
TV VOL TV CH AUDIO SYNC
SOUND EFFECT SMART VOLUME
VOL
TV MUTE TV INFO TV PRE-CH VT DIMMER
SOUND EFFECT SMART VOLUME
VOL
S/W S/W
MUTE
LEVEL LEVEL S/W S/W
MUTE
LEVEL LEVEL
VOL
3D SOUND DRC
PLUS
AH59-02545A
VOL
POWER
TV POWER
POWER TV POWER
AUTO
POWER SPEAKER TV SOURCE
SOURCE
SoundShare
REPEAT
AUTO
POWER
SOURCE SPEAKER TV SOURCE
TV VOL TV CH AUDIO SYNC
TV MUTE TV INFO TV PRE-CH VT DIMMER
SoundShare
SOUND EFFECT
SMART VOLUME
VOL
REPEAT
S/W S/W
MUTE
LEVEL LEVEL
VOL
3D SOUND DRC
PLUS
TV VOL TV CH AUDIO SYNC
AH59-02545A
Using the AUTO POWER LINK function
The Crystal Surround Air Track is automatically turned on when you turn on the
TV or any device connected to the Air Track with the optical cable.
Press AUTO POWER on the remote control of this unit.
• The Auto power link function turns on and off each time you press AUTO
POWER.
AUTO POWER LINK
ON
OFF
▪
If a TV or any device connected to Air Track with the optical cable is off
and there is no digital input, the Air Track is turned off after 20 minutes.
▪
These functions are available only when the Anynet+ (HDMI-CEC) is
turned off.
Using the AUDIO SYNC function
Video may appear out of synch with the audio if the Air Track is connected to a
digital TV. If this occurs, adjust the audio delay time to match the video.
Press AUDIO SYNC +/–. on the remote control of this unit.
• You can use the + , - buttons to set the audio delay time between 0 ms
and 300 ms.
▪
In USB mode, TV mode or BT mode, the Audio Sync function may
not work.
Using the DRC function
This feature balances the range between the loudest and quietest sounds.
You can use this function to enjoy Dolby Digital sound when watching movies
at low volume at night.
Press DRC on the remote control of this unit.
• Each time the button is pressed, the selection changes as follows :
DRC STANDARD ➡ DRC MAX ➡ DRC MIN
Using the VT DIMMER function
This feature controls the brightness of the VACUUM TUBE AMP.
Press VT DIMMER on the remote control of this unit.
• Each time the button is pressed, the selection changes as follows :
VT DIMMER OFF ➡ VT DIMMER MIN ➡ VT DIMMER MAX
▪
The VT DIMMER does not function for 30 seconds when you turn
on the product for the very first time.
SPEAKER button
If the TV and Air Track are connected via HDMI, this button lets you select
between listening to audio through your TV or through the Air Track.
Press SPEAKER on the remote control of this unit.
AUDIO MODE SPEAKER
TV
HDMI IN
Air Track
TV
ARC
Air Track
Display
POWER LINK ON
POWER LINK OFF
Scroll Display
TV SPEAKER
AVR SPEAKER
TV SPEAKER
AVR SPEAKER
Display
TV SPK
HDMI
S MUTE
TV ARC
21