Timberland VD31 Instruction Manual
  1. Manuals
  2. Brands
  3. Timberland Manuals
  4. Watch
  5. VD31
  6. Instruction manual

Timberland VD31 Instruction Manual

Hide thumbs Also See for VD31:
Table of Contents

Advertisement

Quick Links

Download this manual
VD
/ VD
INSTRUCTION MANUAL

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VD31 and is the answer not in the manual?

Questions and answers

Related Manuals for Timberland VD31

Summary of Contents for Timberland VD31

  • Page 1 / VD INSTRUCTION MANUAL...
  • Page 2 DISPLAY AND CROWN / BUTTON OPERATION Minute hand Hour hand Button A...-1 hour / push Dual time of 24 hour hand adjustment First position VD31...Date setting VD32...Time setting Second position VD31...Time setting Dual time of 24 hour hand Crown at normal position (Time difference correction) Button B...+1 hour / push...
  • Page 3 24 hour hand is not in the “0” position, reset them following the procedure below. The battery setting and after battery change, please execute the “0” position adjustment. 1. Pull out the crown VD31...second click VD32...first click 2. Keep the buttons “A” & “B” pressed at the same time more than 2 seconds, and then release the buttons.
  • Page 4 3. Press button A or B to reset the dual time of 24 hour hand to “0” position. * By pressing button A the hand move counter clockwise. * By pressing button B the hand move clockwise. * Press and hold the button, possible to fast-forward modification.

  • Page 5: Time Setting

    1. Pull out the crown when the second hand is at the 12 o’clock position. [ Crown position ] VD31...second click. VD32...first click. 2. Turn the crown to set the hour and minute hands. (Check that 24 hour hand is set correctly) 3.
  • Page 6 1. Pull out the crown when the second hand is at the 12 o’clock position. [ Crown position ] VD31...second click. VD32...first click. 2. To adjust the time by pressing the buttons A or B. By pressing button A the hands move counter clockwise.
  • Page 7 DATE SETTING...Cal.VD31 only 1. Pull out the crown to the first click. 2. Turn the crown to clockwise until the next data appears. 3. Push the crown back in to the normal position. Note * Do not set the date during any time between 9:00 P.M. and 1:00 A.M.
  • Page 8 H / HDATE / H / HDATE INSTRUCTION MANUAL...
  • Page 9 Normal position, watch runs Normal position, watch runs Time setting: Set to the correct time. Push crown back to position 1. - Quick change of the date anticlockwise ) Time setting: DATE MODELS * do not set the date between Set to the correct time.
  • Page 10 INSTRUCTION MANUAL...
  • Page 11 Day setting: to rotate the hour and minute hands clockwise. Note : The day is changed during the period from about 0:00 Normal position, AM to about 5:30 AM. watch runs Time setting: Set to the correct time. Push crown back to position 1. -Quick change of the date ( ...
  • Page 12 INSTRUCTION MANUAL...
  • Page 13 Day setting: to rotate the hour and minute hands clockwise. Note : The day is changed during the period from about Normal position, 0:00 AM to about 5:30 AM. watch runs Time setting: Set to the correct time. Push crown back to position 1. -Quick change of the date ( ...
  • Page 14 INSTRUCTION MANUAL...
  • Page 15 Minute hand 30 minute totalizer Second hand Pushbutton A : start/stop Hour hand Crown Chronographe hand 1/5 second Pushbutton B Date window...
  • Page 16 TO CORRECT THE DATE RESET * do not set the date between 9:00 p.m. and 3:00 a.m.
  • Page 17 OPTION: MOONPHASE SET THE DATE ACCORDING TO THE LAST FULL MOON AFTERWARDS ADAPT LIKE STEP 1.1 AND 1.2 OPTION: DATE BY HAND - DATUM SET THE DATE LIKE STEP 1.1 AND 1.2 • • • • • • • • •...
  • Page 18 TO CORRECT THE TIME HOUR AND MINUTE RESET...
  • Page 19 TO RESET CHRONOGRAPH, MINUTE AND SECOND CHRONOGRAPH MINUTE...
  • Page 20 SECOND RESET...
  • Page 21 CHRONOGRAPH START STOP RESET...

  • Page 22: Measuring Cumulative Times

    MEASURING CUMULATIVE TIMES START STOP...
  • Page 23 START STOP RESET...
  • Page 24 INSTRUCTION MANUAL...
  • Page 25 30 minute totalizer Minute hand Second hand Pushbutton A : start/stop Hour hand Crown Pushbutton B Chronographe hand 1/5 second Date window Day hand...
  • Page 26 TO CORRECT THE DATE RESET...
  • Page 27 TO CORRECT THE TIME HOUR AND MINUTE RESET...
  • Page 28 TO RESET CHRONOGRAPH, MINUTE AND SECOND CHRONOGRAPH MINUTE ENTER...
  • Page 29 SECOND RESET EXIT...
  • Page 30 MEASURING SPLIT TIMES START STOP...
  • Page 31 RESTART STOP RESET...
  • Page 32 DAY HAND Day setting: Turn the crown clockwise and advance the hour and minute hands till the day hand advances to the next day. The day hand cannot be set independently. Then turn back the hour hand by about 4 hours, and advance it again till the day hand advances to the next day.
  • Page 33 MEASURING CUMULATIVE TIMES START STOP RESET...
  • Page 34 INSTRUCTION MANUAL...
  • Page 35 A button Quick correction of Date Attention ! Please Do Not set it between 21:00 and 00:30 midnight Time setting: To rotate the hour and minute Normal position, hands to show the correct watch runs time. Push crown back to position 1.
  • Page 36 INSTRUCTION MANUAL...
  • Page 37 - Quick change of the date clockwise ) * do not set the date between 9:00 p.m. and 3:00 a.m. Month - adjustment button Time setting: To rotate the hour and minute hands to show the correct time. Push crown back to position 1. Normal position, *24hours hand will move watch runs...
  • Page 38 INSTRUCTION MANUAL...
  • Page 39 C button ( optional, not available in some models ) Day setting: Quick correction of Day to rotate the hour and press 2 times to advance one day minute hands *Do not use this button between A button clockwise. 22:00pm to 6:00am Quick correction of Date Note : The day is changed during the...
  • Page 40 INSTRUCTION MANUAL...
  • Page 41 Day setting: to rotate the hour and minute hands clockwise. A button Note : The day is Quick correction of Date changed during the period from about 0:00 AM to about 4:00 AM. Time setting: To rotate the hour and minute Normal position, hands to show the correct watch runs...
  • Page 42 INSTRUCTION MANUAL...
  • Page 43 Small second hand STOPWATCH 1/5-second hand Hour hand Minute hand (Light) D (Set) C a: Normal position b: First click (Mode) E c: Second click 24 hour hand Date • Display: Hour, minute, STOPWATCH minute hand second, day, date, month. •...

  • Page 44: Setting The Time And Adjusting The Stopwatch Hand Position

    1. MAIN TIME SETTING Minute hand Hour hand Turn to set the hour and minute hands. CROWN: SETTING THE TIME AND ADJUSTING THE STOPWATCH HAND POSITION • This watch is so designed that the following are all made with the crown at the second click position 1) main time setting 2) stopwatch hand position adjustment...
  • Page 45 1. When the stopwatch is or has been measuring or is stopped, if the crown is pulled out to the second click, it will automatically reset the STOPWATCH hands to “0”. 2. It is recommended that the hands be set to the time a few minutes ahead of the current time, taking into consideration the time required to adjust the STOPWATCH hand position if necessary.
  • Page 46 Press for 2 second. STOPWATCH 1/5-second hand * STOPWATCH minute hand turns a full circle. Press repeatedly to set STOPWATCH minute hand to the “0” position. * The hand moves quickly if button B is kept pressed. CROWN Press for 2 second. * STOPWATCH 1/5-second hand turns a full circle.

  • Page 47: Setting The Date

    SETTING THE DATE • Before setting the date, be sure to set the main time. CROWN Pull out to first click. Turn clockwise until the desired date appears. Date Push back in to normal position. 1. It is necessary to adjust the date at the end of february and 30-day months. 2.
  • Page 48 STOPWATCH • The stopwatch can measure up to 60 minutes in 1/5-second increments. • After 60 minutes, it will start counting again from “0” repeatedly up to 12 hours. STOPWATCH minute hand STOPWATCH 1/5-second hand Before using the stopwatch, be sure to check that the crown is set at the normal position and that the STOPWATCH hands are reset to the “0”...

  • Page 49: Standard Measurement

    Standard measurement START STOP RESET Accumulated elapsed time measurement START STOP RESTART STOP RESET * Restart and stop of the stopwatch can be repeated by pressing button A. Split time measurement START SPLIT SPLIT RELEASE STOP RESET * Measrement and release of split time can be repeated by pressing button B. Measurement of two competitors START FINISH TIME OF...
  • Page 50 LCD - MODE SELECTION (Mode) E TIME CALENDAR ALARM 2ND TIME ZONE STOPWATCH MODE MODE MODE MODE MODE...
  • Page 51 1. EL - Press button D will activate EL illumination for 3 seconds in any mode. 2. Time Setting - Press E to enter the time mode. Press C for 2 seconds will enter the time setting mode, second will flash, press E to reset second to zero. Press C will flash the hour, press E to set the correct hour.
  • Page 52 chime on chime off chime off chime on alarm on alarm off alarm on alarm off * When alarm is on, it will beep for 20 seconds when reaching the set time. * When setting the alarm time, press and hold E will activate the fast advance of numbers. * If no button is pressed for 60 seconds, the alarm setting mode will return to normal alarm mode.
  • Page 53 INSTRUCTION MANUAL...
  • Page 54 Normal position, watch runs Time setting: Set to the correct time. Push crown back to position 1.
  • Page 55 C (SET) (LIGHT) A B (MODE) • Display: Hour, minute, second, day, date, month. • Alarm, hourly chime • 12/24 hours selection, automatic calendar • 1/100 second stopwatch • second time zone • 2000-2049, auto calendar • EL illumination...
  • Page 56 LCD - MODE SELECTION TIME MODE CALENDAR MODE ALARM MODE STOPWATCH MODE 2ND TIME ZONE MODE...
  • Page 57 1. EL - Press button A will activate EL illumination for 3 seconds in any mode. 2. Time Setting - Press B to enter the time mode. Press C for 2 seconds will enter the time setting mode, second will flash, press B to reset second to zero. Press C will flash the hour, press B to set the correct hour.
  • Page 58 chime on chime off chime off chime on alarm on alarm off alarm on alarm off * When alarm is on, it will beep for 20 seconds when reaching the set time. * When setting the alarm time, press and hold B will activate the fast advance of numbers. * If no button is pressed for 60 seconds, the alarm setting mode will return to normal alarm mode.
  • Page 59 INSTRUCTION MANUAL...
  • Page 60 ATTENTION EL Backlight 1. Never try to open the case or remove its back cover. Stopwatch 2. Do not operate buttons underwater. 3. Should moisture appear inside the watch, have it Dual Time checked immediately by your dealer. Otherwise it can Countdown Timer cause erosion of the metal parts of the watch.
  • Page 61 DISPLAY BUTTONS • The screen shown in below: • Button operation are indicated using (Cartoon) the letters shown in the illustration. Day of week Hour Seconds Minutes Month Date Reset Start / Stop BACKLIGHT • The backlight that uses an EL (electroluminescent) cause the display to glow for easy reading in the dark.

  • Page 62: Mode Selection

    MODE SELECTION • Press “B” to change mode to mode in the following sequence: Timekeeping Mode Stopwatch Mode Countdown Mode Alarm Mode Dual Time Mode Pacer Mode. a. TIMEKEEPING • 12/24H Format • Hour, Minutes, Seconds, Day of week, Month, Date •...
  • Page 63 d. ALARM • 5 Alarms • Hourly time signal • The alarm sounds at the preset time each day e. DUAL TIME • The time for other time zone f. PACER • 10 tempo...

  • Page 64: Time Setting

    a. TIMEKEEPING 4. Press “D” to increase the number, 12/24H Format press and hold to change at high • In the timekeeping mode, press “D” speed. to switch between 12/24H formats. Time Setting 1. In the timekeeping mode, press 5. Repeat step 3 and 4, the selection in the “A”...

  • Page 65: Split Time

    b. STOPWATCH Split Time A Lap Time 1. In the stopwatch mode, press “D” to start the stopwatch. 1. In the stopwatch mode, press “D” to start the stopwatch. 2. Press “A” to display the split time, stopwatch timing continute internally. 2.

  • Page 66: Countdown Timer Setting

    c. COUNTDOWN • When the countdown reaches zero, the alarm 4. Press “D” to increase the sounds for about 60 seconds and press any button number, press and hold to to break it. change at high speed. Countdown Timer Setting 5.

  • Page 67: Alarm1 Setting

    d. ALARM Alarm1 Setting • The alarm sounds at the preset time each day for 1. In the alarm mode, press “A” the about 60 seconds, press any button to break it. hour to flash (flashing indicated in set mode). Alarm and Chime •...

  • Page 68: Dual Time Setting

    e. DUAL TIME f. PACER Dual Time Setting Use The Pacer 1. In the dual time mode, press 1. In the pacer mode, the tempo “A” the hour to flash number flash. (flashing indicated in set mode). 2. Press “A” select the tempo in the following sequence: 2.
  • Page 69 JP /JP INSTRUCTION MANUAL...

  • Page 70: Displays And Buttons

    A) DISPLAYS AND BUTTONS 24 Hour hand 24 Hour hand Day hand Button "A" Day hand Date disc Button "B" Date disc 24 Hour hand (Dual time)

  • Page 71: Setting The Day

    B) SETTING THE DAY 1. Pull the crown out to the 2nd Click Position. 2. Turn the crown clockwise to set the day. 3. After the day has been set, push the crown back to the Normal position. * The day is changed during the period from 0AM to 5AM. C) SETTING THE DATE 1.
  • Page 72 D) SETTING THE TIME 1. Pull the crown out to the 2nd Click Position. 2. Turn the crown clockwise to set hour and minute hands. 3. After the time has been set, push the crown back to the Normal position. E) SETTTING THE DUAL TIME Press button "A"...
  • Page 73 INSTRUCTION MANUAL...
  • Page 74 A) DISPLAYS AND BUTTONS Button A Normal Position JS25 1st Click Position Stopwatch Minute Hand Second Hand 2nd Click Position Stopwatch 24 Hour Hand Second Hand Button B Calendar 24 Hour Hand 24 Hour Hand JS05 Stopwatch Minute Hand Stopwatch Minute Hand JS15 Stopwatch...

  • Page 75: Setting The Time

    B) SETTING THE TIME 1. Pull the crown out to the 2nd Click Position. 2. Turn the crown to set hour and minute hands. 3. After the time has been set, push the crown back to the Normal position. C) SETTING THE DATE 1.

  • Page 76: Using The Stopwatch

    D) USING THE STOPWATCH This stopwatch is able to measure and display time in 1/1 second united up to maximum of 30 minutes. Stopwatch will stop automatically after running continuously for 30 minutes. [Measuring time with the stopwatch] 1. Press button "A" to start the stopwatch. 2.
  • Page 77 INSTRUCTION MANUAL...
  • Page 78 A) DISPLAYS AND BUTTONS Button A Normal Position JS20 1st Click Position Stopwatch Minute Hand Second Hand Stopwatch 24 Hour Hand Second Hand Button B...
  • Page 79 B) SETTING THE TIME 1. Pull the crown out to the 1st Click Position. 2. Turn the crown to set hour and minute hands. 3. After the time has been set, push the crown back to the Normal position. C) USING THE STOPWATCH This stopwatch is able to measure and display time in 1/1 second united up to maximum of 30 minutes.
  • Page 80 D) STOPWATCH RESET (INCL. AFTER REPLACING BATTERY) This procedure should be performed when the stopwatch second & minute hand does not return to the Zero position. 1. Pull the crown out to the 1st Click Position. 2. Press the button "A" to set the stopwatch second hand forward. Press the button "B"...
  • Page 81 INSTRUCTION MANUAL...
  • Page 82 ATTENTION Stopwatch 1. Never try to open the case or remove its back cover. EL Backlight 2. Do not operate buttons underwater. 3. Should moisture appear inside the watch, have it Dual Time checked immediately by your dealer. Otherwise it can Alarms cause erosion of the metal parts of the watch.
  • Page 83 DISPLAY BUTTONS • The screen shown in below: • The operation of buttons are indicated by using the letters shown in the illustration. Seconds Hour Minutes Day of week Date BACKLIGHT • The backlight that uses an EL (electroluminescent) cause the display to glow for easy reading in the dark. Use EL Backlight •...

  • Page 84: Mode Selection

    MODE SELECTION • Press “B” to change mode to mode in the following sequence: Timekeeping Mode Alarm Mode Stopwatch Mode Dual Time Mode. a. TIMEKEEPING • 12/24H Format • Hour, Minutes, Seconds, Day of week, Date • 100 years Calendar (2000 ~ 2099) b.

  • Page 85: Time Setting

    a. TIMEKEEPING 12/24H Format 4. Press “D” to increase the number, press and hold to increase at high • In the timekeeping mode, press “A” speed. to switch between 12/24H formats. Calendar • In the timekeeping mode, press and hold “D” to display: Year, Month, Date. 5.

  • Page 86: Alarm Time Setting

    b. ALARM 4. Press “D” to increase the Alarm and Chime minutes, press and hold to • In the alarm mode, press increase at high speed. “D” to on/off the alarm and chime in the following seauences: Alarm & Chime off Alarm on 5.

  • Page 87: Split Time

    c. STOPWATCH Split Time A Lap Time 1. In the stopwatch mode, press “D” to start the stopwatch. 1. In the stopwatch mode, press “D” to start the stopwatch. 2. Press “A” to display the split time, stopwatch timing continutes internally. 2.

  • Page 88: Dual Time Setting

    d. DUAL TIME Dual Time Setting 1. In the dual time mode, press “A” the hour to flash (flashing indicated in set mode). 2. Press “D” to increase the hour, press and hold to increase at high speed. 3. Press “B” to select the minutes. 4.
  • Page 89 INSTRUCTION MANUAL...
  • Page 90 ATTENTION EL Backlight 1. Never try to open the case or remove its back cover. Stopwatch 2. Do not operate buttons underwater. 3. Should moisture appear inside the watch, have it Dual Time checked immediately by your dealer. Otherwise it can Countdown Timer cause erosion of the metal parts of the watch.
  • Page 91 DISPLAY BUTTONS • The screen shown in below: • Button operation are indicated using the letters shown in the illustration. Day of week (Cartoon) Seconds Hour Minutes Month Date Reset Start / Stop BACKLIGHT • The backlight that uses an EL (electroluminescent) Mode EL backlight cause the display to glow for easy reading in the dark.
  • Page 92 MODE SELECTION • Press “B” to change mode to mode in the following sequence: Timekeeping Mode Stopwatch Mode Countdown Mode Alarm Mode Dual Time Mode Pacer Mode. a. TIMEKEEPING • 12/24H Format • Hour, Minutes, Seconds, Day of week, Month, Date •...
  • Page 93 d. ALARM • 5 Alarms • Hourly time signal • The alarm sounds at the preset time each day e. DUAL TIME • The time for other time zone f. PACER • 10 tempo...
  • Page 94 a. TIMEKEEPING 4. Press “D” to increase the number, 12/24H Format press and hold to change at high • In the timekeeping mode, press “D” speed. to switch between 12/24H formats. Time Setting 1. In the timekeeping mode, press 5. Repeat step 3 and 4, the selection in the “A”...
  • Page 95 b. STOPWATCH Split Time A Lap Time 1. In the stopwatch mode, press “D” to start the stopwatch. 1. In the stopwatch mode, press “D” to start the stopwatch. 2. Press “A” to display the split time, stopwatch timing continute internally. 2.
  • Page 96 c. COUNTDOWN • When the countdown reaches zero, the alarm 4. Press “D” to increase the sounds for about 60 seconds and press any button number, press and hold to to break it. change at high speed. Countdown Timer Setting 5.
  • Page 97 d. ALARM Alarm1 Setting • The alarm sounds at the preset time each day for 1. In the alarm mode, press “A” the about 60 seconds, press any button to break it. hour to flash (flashing indicated in set mode). Alarm and Chime •...
  • Page 98 e. DUAL TIME f. PACER Dual Time Setting Use The Pacer 1. In the dual time mode, press 1. In the pacer mode, the tempo “A” the hour to flash number flash. (flashing indicated in set mode). 2. Press “A” select the tempo in the following sequence: 2.
  • Page 99 INSTRUCTION MANUAL...
  • Page 100 ATTENTION Stopwatch 1. Never try to open the case or remove its back cover. EL Backlight 2. Do not operate buttons under water. 3. Should moisture appear inside the watch, have it Dual Time checked immediately by your dealer. Otherwise it can Alarms cause erosion of the metal parts of the watch.
  • Page 101 DISPLAY BUTTONS • The screen shown in below: • The operation of buttons are indicated by using the letters shown in the illustration. Date Day of week Carton Seconds Hour Minutes BACKLIGHT • The backlight that uses an EL (electro-luminescent) cause the display to glow for easy reading in the dark.
  • Page 102 MODE SELECTION • Press “B” to change mode to mode in the following Sequence: Timekeeping Mode Alarm Mode Stopwatch Mode Dual Time Mode. a. TIMEKEEPING • 12/24H Format • Hour, Minutes, Seconds, Day of week, Date • 100 years Calendar (2000 ~ 2099) b.
  • Page 103 a. TIMEKEEPING 12/24H Format 4. Press “D” to increase the number, press and hold to increase at high • In the timekeeping mode, press “A” speed. to switch between 12/24H formats. Calendar • In the timekeeping mode, press and hold “D” to display: Year, Month, Date. 5.
  • Page 104 b. ALARM 4. Press “D” to increase the Alarm and Chime minutes, press and hold to • In the alarm mode, press increase at high speed. “D” to on/off the alarm and chime in the following sequences: Alarm & Chime off Alarm on 5.
  • Page 105 c. STOPWATCH Split Time A Lap Time 1. In the stopwatch mode, press “D” to start the stopwatch. 1. In the stopwatch mode, press “D” to start the stopwatch. 2. Press “A” to display the split time, stopwatch timing continutes internally. 2.
  • Page 106 d. DUAL TIME Dual Time Setting 1. In the dual time mode, press “A” the hour to flash (flashing indicated in set mode). 2. Press “D” to increase the hour, press and hold to increase at high speed. 3. Press “B” to select the minutes. 4.
  • Page 107 INSTRUCTION MANUAL...

  • Page 108: Date Setting

    TIME SETTING: 1. Pull crown out to position 3. 2. Turn the crown to set the desired time. 3. Return the crown to its normal position DATE SETTING: 1. Pull the crown out to position 2 2. Turn the crown counter-clockwise until the correct date is shown in the date window.

  • Page 109: Chronograph Operation

    CHRONOGRAPH OPERATION: The chronograph can measure up to 1 hours in one CHRONO 24 HOUR second increments. Pusher A starts and stops the MINUTE HAND chrono operation. Pusher B is for reset. To measure elapsed or split time: 1. PRESS pusher A to start timing 2.

  • Page 110: Adjusting The Chronograph

    24-HOUR SUB-DIAL SETTING: The 24-hour hand moves correspondingly with the hour and minute hands. When setting the time be sure to check that the 24-hour hand is set properly. ADJUSTING THE CHRONOGRAPH: 1. Pull the crown to position 3. 2. Press A to reset the chronograph second hand to zero.
  • Page 111 INSTRUCTION MANUAL...
  • Page 112 TIME SETTING: 1. Pull crown out to position 2. 2. Turn the crown to set the desired time. 3. Return the crown to its normal position SECOND...
  • Page 113 CHRONOGRAPH OPERATION: The chronograph can measure up to 1 hours in one CHRONO 24 HOUR second increments. Pusher A starts and stops the MINUTE HAND chrono operation. Pusher B is for reset. To measure elapsed or split time: 1. PRESS pusher A to start timing 2.
  • Page 114 24-HOUR SUB-DIAL SETTING: The 24-hour hand moves correspondingly with the hour and minute hands. When setting the time be sure to check that the 24-hour hand is set properly. ADJUSTING THE CHRONOGRAPH: 1. Pull the crown to position 2. 2. Press A to reset the chronograph second hand to zero.
  • Page 115 INSTRUCTION MANUAL...
  • Page 116 TIME SETTING: 1. Pull crown out to position 2. 2. Turn the crown to set the desired time. 3. Return the crown to its normal position SECOND...
  • Page 117 CHRONOGRAPH OPERATION: * The measurement time is indicated by the stopwatch hands that move independently of the center hands. CHRONO 1/10 SECOND * The stopwatch can measure up to 60 minutes. * The stopwatch measures in 1/10 second increments. To measure elapsed or split time: 1.
  • Page 118 ADJUSTING THE CHRONOGRAPH: 1. Pull the crown to position 2. 2. Press button A or B to reset all stopwatch hands to "0" position. * The stopwatch minute hand moves correspondingly with the stopwatch second. * The hands move quickly if the respective buttons are kept pressed. 3.
  • Page 119 VX J INSTRUCTION MANUAL...
  • Page 120 Day setting: Turn the crown clockwise and advance the hour and minute hands till the day hand advances to the next DAY HAND DATE HAND day. The day hand cannot be set independently. Then turn back the hour hand by about 4 hours, and advance it again till the day hand advances to the next day.
  • Page 121 VX J INSTRUCTION MANUAL...
  • Page 122 Features • Hour, minute and second hands • Day, date and 24-hour indicators Minute hand Second hand Hour hand Day hand 24-hour hand Crown N: Normal position 1: First click position Date hand...

  • Page 123: How To Set Time

    How to set time Pull out to 1st position • Pull the crown out to the 1st click position when • Turn to set the time taking AM/PM into the seconds hand is at the 12 o’clock position. consideration.
  • Page 124 Push back to Normal position • Push the crown back to the normal position. • Advance Setting Technique. • The 24-hour hand moves correspondingly with the hour hand. • When setting the hour hand, check that the 24-hour hand is correctly set. •...
  • Page 125 How to set date and day of the week Day Correction: With each pressing of the button A, the day hand advances to the next day. Date Correction: With each pressing of the button B, the date hand advances one day. •...
  • Page 126 VX N INSTRUCTION MANUAL...
  • Page 131 VX P INSTRUCTION MANUAL...
  • Page 135 INSTRUCTION MANUAL...
  • Page 136 Day setting: Turn the crown clockwise and advance the hour and minute hands till the day hand advances to the next DAY HAND DATE HAND day. The day hand cannot be set independently. Then turn back the hour hand by about 4 hours, and advance it again till the day hand advances to the next day.

This manual is also suitable for:

Vd32

Table of Contents