Advertisement
Quick Links
Installation Overview
1, EasyCAP001 Wireless Camera Receiver:
1* EasyCAP001 Wireless Camera Receiver
1* Power Adapter
1* USB Cable
1* Installations CD-ROM with:
. Driver for EasyCAP001 Wireless Camera Receiver
. Application
2, EasyCAP002 USB 2.0 DVR
1* EasyCAP002 USB 2.0 DVR
1* Installations CD-ROM with:
. Driver for EasyCAP002 USB 2.0 DVR
. Application
Connecting the EasyCAP001 Wireless Camera Receiver when you use it by TV, Monitor, or
LCD Monitor:
You must connect the Power Adapter to Wireless Camera Receiver when you use it by TV, Monitor, or LCD Monitor.
And you can use Remote Controller to set any function.
Driver-Installation
ote: "If you have any anti-virus software enabled, please disable it during the installation of the
software."
N
When you first connect the EasyCAP001 Wireless Camera Receiver ( or EasyCAP002 USB 2.0 DVR) to
your computer a Hardware Assistant will appear, the "USB 2.0 Video Capture Controller" will be recognized.
Insert the "Installations CD-ROM" into your CD drive.
Select the option "Install Driver" and click "Next".
If prompted "Can Windows connect to Windows Update to
search for software?" select "No, not this time" and select
"Next". Select the option "Install the software automatically"
and click "Next".
A window may appear about the "STK1160 ATV BDA" not
passing the windows logo testing, select "Continue Anyway".
When "Completing the Found New Hardware wizard" window
appears click the "Finish" button to complete the driver
installation.
ote: "If any further components are found please repeat
the above process until you receive the message "Found
N
new hardware: Your hardware is installed and configured
use"
You will now need to check that The drivers are installed correctly.
Right Click on My Computer and Left Click on Properties. Click on Hardware tab and then Device Manager.
EasyCAP001 Wireless Camera Receiver
EasyCAP002 USB 2.0 DVR
Quick Installation Guide
Advertisement
Summary of Contents for EasyCap EasyCAP001
-
Page 1: Quick Installation Guide
“If you have any anti-virus software enabled, please disable it during the installation of the software.” When you first connect the EasyCAP001 Wireless Camera Receiver ( or EasyCAP002 USB 2.0 DVR) to your computer a Hardware Assistant will appear, the “USB 2.0 Video Capture Controller” will be recognized. - Page 2 You will need to remove the driver and disconnect the EasyCAP001 Wireless Camera Receiver ( or EasyCAP002 USB 2.0 DVR) from the computer and re-connect is to install the driver again.
- Page 3 Run Wireless Camera Watcher which you just installed. Instruction of remote controller(EasyCAP001) Note: The remote control only work for control the hardware device, not for the application of this device. Please do not use the channel auto-view function with both application and remote control at same time.
- Page 4 CH1~CH4: to select the 1~4 channel on. Auto: stop/start channel auto-view, automatically select CH1-CH2-CH3-CH4, then CH1... The default speed is 1 time/second (you can also change the speed with using "CH1~CH4", for example: when you click "CH1" then click "Auto" the speed will be 1 time/second, CH2 for 2 time/second and so on... Set: If you do not want to view any channel(s) of your camera, because some reason or you do not have 4 cameras, you can choose to skip the channel(s) when you using channel auto-view function.