Advertisement
2. Firmware Upgrade with the USB Memory Drive
10. It is safe to remove the USB Memory Drive after the TV turns on.
6. The TV scans the USB Memory Drive.
Note: This may take up to 30 seconds.
7. A message will appear asking
if you want to perform the firmware
update.
Select "Yes" and then press the
"Enter" button on the remote control.
8. The firmware update will start.
This should take 30 sec. to 1 min.
-. Do not disconnect
the USB drive during this step.
-. Do not unplug the power cable
or turn the TV off.
9. After completing the firmware update,
the TV will turn off in 3 seconds and
turn back on.
Advertisement
