Advertisement
Quick Links
Thank you for choosing a time-piece from our collection.
The Xezo Air Commando Limited Edition 500 sports 2 screw-down crowns.
Crown (A) at 3 o'clock is used to adjust local time, 2
caliber 2893-2) and date.
Crown (B) at 10 o'clock operates the inner rotating bezel.
Both crowns are screw-down locked crowns.
Your watch is fitted with Swiss-made ETA automatic movement (calibers 2893-2,
2892A2, 2836-2, and 2824-2). The inner mechanism of the watch has a free swinging
rotor that keeps the mainspring wound via the motion of your wrist. A watch fitted with
an automatic winding movement is rewound by the regular movements of your wrist.
Once fully wound, your watch will continue to keep time for approximately 42 hours
(calibers 2893-2 and 2892A2) after removing it from your wrist. Beyond this time, the
watch will stop. You will then need to rewind it manually by unlocking the crown (A), and
then turning the crown (A) clockwise (approximately 20 turns) to provide it with the
necessary power reserve. After that, your daily activity should wind the watch
sufficiently to keep it running at night when it is not being worn. You should wear your
watch everyday to ensure optimal rewinding.
To unlock the screw-down crown (A) turn it 10-12 times
Important note:
counter-clockwise.
Note: As this is a mechanical watch, quartz watch accuracy cannot be expected.
We recommend self-adjustment exercise before setting the time and date.
Unlock the screw-down crown (A) by turning it 10-12 times counter-clockwise.
Pull out the crown (A) to Position "3" (two "clicks" out). The seconds hand is stopped.
Turn the crown clockwise and counter-clockwise, to let the hour hand and the minute
hand do "exercise" or "self-adjustment". For example set hour and minute hands at
6:30PM and then 5:30PM. Then, set hour and minute hands at 6:00PM.
You should notice that the GMT hand (24-hour red color hand for caliber 2893-2) now
points to one of the 24 "hour" markers on the dial.
Once you have performed self-adjustment exercise, return the screw-down crown (A) to
the locked position by pressing it against the case and turning it clockwise. Screw-down
crown (A) now should be screwed down tightly to Position "1".
Crown (A) is unscrewed and pulled one "click" out
time zone (movement
nd
Advertisement
Related Manuals for Xezo Air Commando
Summary of Contents for Xezo Air Commando
- Page 1 Crown (A) is unscrewed and pulled one “click” out Thank you for choosing a time-piece from our collection. The Xezo Air Commando Limited Edition 500 sports 2 screw-down crowns. Crown (A) at 3 o’clock is used to adjust local time, 2 time zone (movement caliber 2893-2) and date.
-
Page 2: Important Note
Setting the Time and Date (movement calibers 2893-2, 2892A2, 2824-2) Important note: Do not change the date between 8 p.m. and 2 a.m. as this may damage the movement. This is when the pinions are being repositioned to carry out the automatic date change. Unlock the screw-down crown (A) by turning it 10-12 times counter-clockwise. - Page 3 Time Zone Feature (for movement caliber 2893-2) Note: The second time zone is read in military time (1:00 p.m. = “13”, 2:00 p.m. = “14”, etc.). The military time hours appear in red color on the dial. Begin by setting the regular time by following self-adjustment exercise the instructions for Setting the Time and Date.
- Page 4 Using dual-directional inner rotating bezel to track elapsed time (for Air Commando and Air Commando R models) This feature enables you to track elapsed time in hours. Hold the watch face-up with the numeral 6 pointing toward you and the calendar on your right.
- Page 5 Cal. 2893-2, 2892A2 - 42 hours Cal. 2836-2, 2824-2 - 38 hours Servicing your Xezo Automatic watch Although components in your watch have been manufactured from first-rate materials, certain parts are subject to natural wear and tear. It is vital that all moving parts are properly lubricated at all times and that the watch is cleaned at regular intervals to remove dirty oil.