Flash Intensity Control - Olympus E-450 Instruction Manual

2
Press the shutter button halfway.
• The # (flash stand-by) mark lights when the
flash is ready to fire. If the mark is blinking, the
flash is charging. Wait until charging is complete.
3
Press the shutter button all the way.
TIPS
When you do not want the flash to pop up automatically:
j Set [AUTO POP UP] to [OFF]. g"AUTO POP UP" (P. 88)
x
Notes
• When [#RC MODE] is set to [ON], the built-in flash will fire only to communicate with the
external flash so it will not function as a flash. g"Shooting with the Olympus wireless RC
flash system" (P. 71)

Flash intensity control

The flash intensity can be adjusted from +3 to -3.
In some situations (e.g., when shooting small subjects, distant backgrounds, etc.), you may
get better results by adjusting the amount of light emitted by the flash ("flash intensity"). It is
useful when you intend to increase the contrast (distinction between light and dark) of images
to make the images more vivid.
Direct button
Super control panel
Menu
x
Notes
• This does not work during manual flash.
• This does not work when the flash control mode on the electronic flash is set to MANUAL.
• If flash intensity is adjusted on the electronic flash, it will be combined with the camera's flash
intensity setting.
• When [w+F] is set to [ON], the flash intensity value will be added to the exposure
compensation value. g"w+F" (P. 87)
# + F j
i p: [w]
MENU [X] [w]
Flash stand-by mark
Viewfinder
# button
METERING
RC MODE
AF MODE
AF AREA
ANTI-SHOCK
CANCEL SELECT
F button
j
7
+3
OFF
+2
0.0
+1
0 0 S-AF
0
-1
-2
OFF
-3
GO
69
EN