Q Power On; System Requirements - Olympus SZ-10 Instruction Manual

Selecting a method for connecting Selecting a method for connecting
the camera to other devices the camera to other devices
[USB Connection] [USB Connection]
r (Settings 1) USB Connection
Submenu 2
When the camera is connected to
Auto another device, the settings selection
screen is displayed.
Select when connecting the camera
Storage
to a computer via a storage device.
Select when transferring images
without using the supplied [ib] (PC
MTP
software) on Windows Vista/
Windows 7.
Select when connecting to a
Print
PictBridge-compatible printer.

System requirements

System requirements
Windows : Windows XP Home Edition/
Professional (SP1 or later)/
Vista/Windows 7
Macintosh : Mac OS X v10.3 or later
When using another system other than Windows XP
(SP2 or later)/Windows Vista/Windows 7, set to
[Storage].
Even if a computer has USB ports, proper operation
is not guaranteed in the following cases:
●
Computers with USB ports installed using an
expansion card, etc.
●
Computers without a factory-installed OS and
home-built computers
For information on using the menus, see "Setup menu" (p. 6).
Application
Turning on the camera with the q
Turning on the camera with the

q Power On]

button [q button [ Power On]
q Power On
r (Settings 1)
Submenu 2
The camera is not turned on. To turn
on the camera, press the n
No
button.
Press and hold the q button to turn
Yes
the camera on in the playback mode.
Saving the mode when the camera is Saving the mode when the camera is
turned off [Keep turned off [Keep z z Settings]
r (Settings 1) Keep z Settings
Submenu 2
The shooting mode is saved when
the camera is turned off and is
Yes
reactivated the next time the camera
is turned on.
The shooting mode is set to P mode
No
when the camera is turned on.
Choosing the opening screen display Choosing the opening screen display
[Pw On Setup] [Pw On Setup]
r (Settings 1) Pw On Setup
Submenu 2
Off No opening screen is displayed.
The opening screen is displayed
On
when the camera is turned on.
q
Application
Settings]
Application
Application
EN
49