Network; Pin Code Management; Connection Mode; Sms - One Touch Y280 User Manual

2.3 Network


Network Mode:Automatic/4G only/3G only/2G only, default is automatic.

Network Selection: Automatic/Manual, default is automatic.
Select a Network Manually
1,Choose Manual in the network selection.
2,Click <Apply>.
3,Click <Refresh> to list the available network.
4,Choose the network and Click <Select> to register.
Note: For the Services, LTE, UMTS, GSM. For the Status, Active( the network
registered), Available( the network can be used).

2.4 PIN Code management

Enable PIN
1, When PIN is disable, click <Enable>, PIN input page is displayed.
2, Enter the PIN you want to set, only number is accepted.
3,Click <Apply>.
Disable PIN
1, When PIN is enable, click <Disable>, PIN input page is displayed;
2,Enter the correct PIN;
3,Click <Apply>;
Change PIN
1, When PIN is enable, click <Change PIN>,PIN input page is displayed;
2,Enter the Old PIN/New PIN/Confirm PIN;
3,Click <Apply>;
Note: when you entered wrong PIN 3 times, PUK is needed, you can get this key from
the operator.

2.5 Connection Mode

Auto connect in roaming:

3. SMS

You can move the mouse to "SMS" and click the items you want. In this section, the
following items are included:
New: write the new SMS.

Read: list the SMS received.

6