Subscribe to Our Youtube Channel
Summary of Contents for Marmitek Babyview 725
- Page 1 BABYVIEW BABYVIEW 7 2 5 USER MANUAL 20611/20141007 • BABYVIEW 725 ALL RIGHTS RESERVED MARMITEK ©...
- Page 2 © MARMITEK...
-
Page 3: Safety Warnings
In case of improper usage or if you have altered and repaired the product yourself, all guarantees expire. Marmitek does not accept responsibility in the case of improper usage of the product or when the product is used for purposes other than specified. - Page 4 Children should be supervised to ensure that they do not play with the appliance. Disconnect the AC/DC Power Adapter from the mains, when this device is not in use for a prolonged peroid of time. © MARMITEK...
-
Page 5: Table Of Contents
Volume Setting ( Monitor ) ......... 19 Camera Selection ( Camera Select ) ....19 Temperature Setting ( Temp. Setting ) ....20 VOX (Voice-Operated Transmission) Function . 21 Music Function ..........22 Night Light Setting ..........23 BABYVIEW 725... -
Page 6: Set Includes
1 x Camera 1 x Monitor 2 x Power Adapter (with 2 meter cable) 1 x Battery for Monitor ( 3.7V 700mAh Li-ion ) 2 x Cable Clip 2 x Screw 2 x Wall Anchor 1 x User's Manual © MARMITEK... -
Page 7: Introduction
INTRODUCTION Congratulations on your purchase of your BabyView 725 video baby monitor. The Marmitek BabyView 725 video baby monitor provides you with round-the-clock support and it allows you to see your baby day and night from anywhere in the house. The latest digital technology guarantees clear sound and the clearest image of your baby. -
Page 8: Features
Soft night light with 3 colours and 4 dimlevels Remotely selectable lullabies Volume indicator LEDs Out of range indication and alert Temperature monitoring and alert Expandable up to 8 cameras Extra long power cables (2 meters) © MARMITEK... -
Page 9: Component Identification
COMPONENT IDENTIFICATION Camera Night Light Power indicator LED Lens Microphone Power adapter plug Antenna Light sensor Power/Pairing button Infrared LEDs 10. Speaker 11. Temperature sensor BABYVIEW 725... -
Page 10: Monitor
Monitor Power button Antenna Talkback button LCD screen Power indicator (Touch panel) Menu button Microphone Power adapter VOX indicator plug Holder Volume indicator Battery LEDs compartment Speaker © MARMITEK... -
Page 11: Installation
Note 1: Use the adapter labeled OUTPUT: 6V DC with the camera. Note 2: Press and hold the Power button over two seconds to turn off the camera. BABYVIEW 725... -
Page 12: Fine Tuning
The system comes with a camera unit that has already been paired with the monitor unit. The pairing function gives each camera unit a separate channel on the monitor unit. This is necessary for configuring additional camera units. © MARMITEK... - Page 13 If there is out of range, the picture will be displayed on the LCD screen and the warning sound will be emitted from the monitor unit if the monitor exceeds the range (unlink). The warning sound will be emitted from the monitor until you press any button to stop. BABYVIEW 725...
-
Page 14: Monitor Setup
Note 2: Press and hold the Power button over two seconds to turn off the monitor. Note 3: Remove the battery from the monitor if you do not plan to use it for a prolonged period of time. © MARMITEK... -
Page 15: Using Ac Power
LED will appear orange. If charging is finished (fully charged) the "Power" LED will turn green. When power off and charging starts, and "Power" LED will appear red. If charging is finished (fully charged) the "Power" LED will turn green. BABYVIEW 725... -
Page 16: Talkback Function
Talkback Function Press the talkback button to speak through the camera unit. Menu Options Press the menu button on the monitor unit to display the main menu on the screen (touch panel).. There are three main menus. © MARMITEK... - Page 17 (Fig. 17) Volume Setting (Camera) (Fig. 18) Music Function (Fig. 19) Night Light Setting (Fig. 20) Display Frequency and White Balance Setting Last Page (Fig 21) Delete Camera (Fig 22) Add Camera (Fig 25) Flip Function (Fig. 26) Restore Default BABYVIEW 725...
-
Page 18: Brightness Setting ( Brightness )
Brightness Setting ( Brightness ) In this submenu you can adjust brightness of the screen. © MARMITEK... -
Page 19: Volume Setting ( Monitor )
Volume Setting ( Monitor ) In this submenu you can adjust volume level on monitor side. Camera Selection ( Camera Select ) In this submenu you can select which camera that you want to display on the screen. BABYVIEW 725... -
Page 20: Temperature Setting ( Temp. Setting )
F to 99 F ). 3. You can set temperature compensation manually for adjustment in performance of system to compensate for exact temperature of camera side. Note: The range of temperature compensation that can be set is ±2 C（±2 F） © MARMITEK... -
Page 21: Vox (Voice-Operated Transmission) Function
3. This will turn off the screen within 10 seconds and enter power saving mode. 4. When the sound from the camera reaches the set level, the screen will turn on automatically and a warning sound will be emitted from the monitor unit. BABYVIEW 725... -
Page 22: Music Function
, the camera will play the first song. 2. Press the button , the camera will play the next song. 3. You can play all lullabies when you choose the repeat icon. 4. You will stop the lullaby when you choose this icon. © MARMITEK... -
Page 23: Night Light Setting
Press the icon , you can change the color of the night light. There are three colors of night light (yellow, green, orange). Press the icon , you can change the level of brightness. There are four levels of brightness. BABYVIEW 725... -
Page 24: Display Frequency And White Balance Setting
There are three types of color temperature and two frequencies (50Hz or 60Hz). Delete Camera In this submenu you can delete a paired camera. Please press which number of cameras you want to delete. Press to delete. © MARMITEK... -
Page 25: Add Camera
You don’t need to turn on the power of the camera. 4. When pairing is completed, it will “ on the monitor. show " 5. When pairing is failed, it will show this picture on the monitor. BABYVIEW 725... -
Page 26: Flip Function
Flip Function In this submenu you can flip the video vertically when mounting the camera on the ceiling. Restore Default In this submenu you can reset the system to default. Press make sure. © MARMITEK... -
Page 27: Status Information
STATUS INFORMATION Status Bar The status bar will be displayed on the top of the screen. 1. Camera number indicator 2. Signal strength indicator 3. Temperature indicator (Camera side) 4. Battery status / Charging indicator BABYVIEW 725... -
Page 28: Warning Alarm
(See Setup) Low battery 2 consecutive Connect the beeps and monitor unit to on the screen the AC adapter. blinking (See Setup) Note : You can press any key of the monitor to stop the alarm. © MARMITEK... -
Page 29: Optional Accessories
Make sure the camera and the monitor are within range of each other (range of approximately 150 metres in a clear line of sight). Do you have other questions that have not been resolved by the above information? Please go to www.marmitek.com BABYVIEW 725... -
Page 30: Care And Maintenance
Do not overload electrical outlets or extension cords this can result in fire or electric shocks. Do remember that you are using public airwaves when you use the system and that sound and © MARMITEK... -
Page 31: Following The Safety Tips
1 meter away. Note: It's important even if your baby is not yet standing or mobile. Never use extension cords with AC adapters. Only use the AC adapters provided. BABYVIEW 725... -
Page 32: Technical Data
Battery Voltage 3,7V Charger Time Power adapter: 3.0-4 hours Battery Life 3+ hours with fully charged battery and the screen on 10+ hours with fully charged battery and VOX function activated"Operating temperature 0 degrees C ~ 40 degrees C © MARMITEK... -
Page 33: Declaration Of Conformity
DECLARATION OF CONFORMITY Hereby, Marmitek BV, declares that this BABYVIEW 725 is in compliance with the essential requirements and other relevant provisions of the following Directives: Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1999 on radio equipment and... - Page 34 Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. For more detailed information about the disposal of your old equipment, please contact your local authorities, waste disposal service, or the shop where you purchased the product. © MARMITEK...
-
Page 35: Copyrights
COPYRIGHTS Marmitek is a trademark of Pattitude B.V. BabyView 725™ is a trademark of Marmitek B.V. All rights reserved. Every effort has been made to ensure that the information in this manual is accurate. Marmitek is not responsible for printing or clerical errors. - Page 36 © MARMITEK...
Need help?
Do you have a question about the Babyview 725 and is the answer not in the manual?
Questions and answers