Samsung GT-S5830 Service Manual page 28

7. Level 2 Repair
5 1) Place LCD on the BRACKET.
（ Caution
Be care of damage to LCD FPCB.
1)
Connect the TSP connector.
7
（ Caution
1) Be care of scratch and molding damage.
2) Be care of TSP Fpcb damage.
This Document can not be used without Samsung's authorization
SAMSUNG Proprietary-Contents may change without notice
1) Pass FPCB to BRACKET hole and then
6
attach the TSP to BRACKET using JIG.
（ Caution
1)
Be care of damage the TSP FPCB.
2) Be care of scratch and molding damage.
8
1) Put the RCV to BRACKET.
2) Assemble the SUS to BRACKET.
（ Caution
1) Be care of damage the RCV.
2) Be care of scratch and molding damage.
7-4