Creating A Custom Thread Table - Baby Lock Valiant BMV10 Instruction And Reference Manual

k Touch the positioning keys to move the
embroidery frame until the thread mark on
the fabric is aligned on the needle drop
point in the camera view window.
1 Thread mark on the fabric
2 Positioning keys
• Touch to check the embroidering position.
Memo
• Touch to enlarge the camera view. By
enlarging the camera view, you can make a
close adjustment for the needle drop
position moving the embroidery frame little
by little.
l If the pattern position cannot be aligned
using the positioning keys, rehoop the
fabric, and then try again to align the
position with the positioning keys.
Note
• After you have aligned the position of the
combined border pattern, do not rotate the
pattern in the embroidering settings screen.
If the pattern is rotated in the embroidering
settings screen, you cannot sew the pattern
properly aligned even if the thread mark and
the starting point are aligned in the camera
view window.
m Touch to return to the previous
screen.
n Remove the thread mark.
o Touch .
p Touch , and then press the start/stop
button to start embroidering.

Creating a custom thread table

You can create a custom thread table containing
the thread colors that you most often use. You can
select thread colors offered by the machine's
extensive list of thread colors from nine different
thread brands. You can select any color and move
the color to your custom thread table.
1
• Some machine models may already have an
2
• You have the option to completely clear, or
Before creating a custom thread table, select a
pattern and display the pattern editing screen.
(Refer to page 45 and 73.)
a Touch
SELECTING/EDITING/SAVING PATTERNS
Note
additional 300 Robison-Anton thread colors
contained in the custom thread table.
to restore the Custom Thread Table to the
original factory setting. Visit our website at
" www.babylock.com " for Custom Thread
Table Clear/Restore Program and
instructions.
and then touch
5
.
195