Advertisement
SLIDE AND NEGATIVE HOLDER LOADING METHOD
Loading Negatives
a. Hold up the negative toward the light. Face the right
side of the negative to yourself.
b. Take out negative holder out. Let the side with "open"
logo face yourself, and let the side with ""logo face
down. Open the negative holder, then place
negative into recessed area in the holder.
Close the negative holder and press the edges so
that it locks in place.
c. Insert the negative holder into the slot on the right
side of the film scanner.
Loading Slides
a. Hold up the slide toward the light. Face the righ side of
the slide to yourself. (we don't provide white small holder).
b. Take out slide holder out. Let the side with "open" logo face
yourself, and let the side with ""logo face down.
Open the slide holder, then place slides into recessed area in
the holder. (films also could be loaded as a strip into the slide
holder, forming drawer type as below picture)
Close the slide holder and press the edges so that
it locks in place.
c. Insert the slide holder into the slot on the right side of the film
scanner as shown.
WARNING: Handle films with care to avoid scrathesor finger prints (for the best use cotton gloves when handling films)
It is recommended to use compressed cotton to remove any dust on the films.
- 3 -
Advertisement
