Power Management; Screen Blank State; Putting The Computer To Sleep Or; Shutting It Down - Lenovo ideapad 305-15IHW Hardware Maintenance Manual

Lenovo ideapad 305-15IHW/305-15IBD/305-15IBY/305-15ABM

Power management

Note: Power management modes are not supported for APM operating system.
To reduce power consumption, the computer has three power management
modes: screen blank, sleep (standby), and hibernation.

Screen blank state

If the time set on the "Turn off monitor" timer in the operating system expires,
the LCD backlight turns off. You can also turn off the LCD backlight by pressing
F9
To end screen blank state and resume normal operation, press F9
Putting the computer to sleep or shutting it down
When you have finished working with your computer, you can put it to sleep or
shut it down.
Putting your computer to sleep
If you will be away from your computer for only a short time, put the computer
to sleep. When the computer is in sleep mode, you can quickly wake it to resume
use, bypassing the startup process. To put the computer to sleep:
• For the Windows 7 operating system:
• For the Windows 8 operating system:
Attention: Wait until the power indicator light starts blinking (indicating that
the computer is in sleep mode) before you move your computer. Moving your
computer while the hard disk is spinning can damage the hard disk, causing loss
of data.
To wake the computer, do one of the following:
• Press any key on the keyboard.
• Press the power button.
.
– Click Start
– Open the charms bar, then select Settings
Sleep.
Sleep.
.
Power
25