Using The Flash Light; Capturing Photos And Videos - HTC hd2 User Manual

Using the flash light

Your phone has a flash light that helps to illuminate dark subjects
when the camera is focusing and capturing a photo or video. The flash
light operates in two modes: assist light and camera flash.
Tap the onscreen Flash Light button repeatedly to cycle through the
following settings:
Flash Mode Function
When there is not enough environmental light, the camera flash
turns on automatically when you take a photo, while the assist
light turns on automatically when you capture a video and
remains on until you stop capturing.
The assist light turns on every time the camera focuses. The
camera flash then turns on when you take a photo, while the
assist light turns on when you capture a video and remains on
until you stop capturing.
The flash light is always off.

Capturing photos and videos

The camera features two types of focus modes: Auto Focus and
Touch Focus. When using either type of focus mode, the camera is
capable of automatically focusing when you move and point it in
another direction. While the camera is focusing, the screen displays an
animated bracket that changes to a steady, rectangular bracket (
when the focus is set.
Use the Virtual Camera button (
capturing photos or videos. After the camera focuses, press the
Virtual Camera button shortly to capture the photo or video. You can
also press and hold the Virtual Camera button to refocus and then
capture the photo or video.
Chapter 12 Camera and Multimedia 2
) as the shutter release when
)