AntRouter Manual Last updated: 4/27/2016 Page 2 of 9 Contents Overview ........................... 3 Features ............................. 4 Functions ........................... 5 3.1 Bitcoin Solo Miner ......................5 3.2 Mini WiFi Access Point ....................... 6 3.3 High Speed USB Charger ....................6 3.4 Bitcoin Mining Host ......................6 After-Sales Service ........................
Bitmain is dedicated to Bitcoin mining decentralization, it is the first product of Bitcoin Internet of Things we launched. When you first configure your new R1, you should make sure that it’s properly linked to your Bitmain ID. This happens automatically if you purchase from Bitmaintech.com, but if you obtain the R1 elsewhere, you will need to link your account manually.
AntRouter Manual Last updated: 4/27/2016 Page 4 of 9 2 Features Front Panel Technical Specifications Input Voltage 100V-220V Input Current 0.2A WiFi Standard 802.11g/n WiFi Band 2.4G WiFi Transmission Rate 150M USB Charge Voltage 5.0V USB Charge Current Max to 2A Dimensions 84.5 ×...
Good luck! After linking the R1 to your Bitmain ID, the device can mine continuously as long as it has power and an internet connection. You will be notified by email when you find a block.
Connect an AntMiner U3 to the R1's USB port, then configure the U3's pool and worker name in the management system to mine. The U3 must be connected to the R1 by a USB hub, even when there is only one U3. One R1 can control several U3s.
Page 7
AntRouter Manual Last updated: 4/27/2016 Page 7 of 9 For more tips and suggestions , please visit www.antpool.com/user/antRouter.htm. Page 7 / 9...
Last updated: 4/27/2016 Page 8 of 9 After-Sales Service Warranty R1 has a 1 year limited warranty. Within 15 days of purchasing the product, you are entitled to a replacement for a non-human-induced major failure. Voided Warranty This warranty does not apply:...
AntRouter Manual Last updated: 4/27/2016 Page 9 of 9 no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna.
Need help?
Do you have a question about the R1 and is the answer not in the manual?
Questions and answers