Digital Radar Cables - Raymarine VCM100 Installation Instructions Manual

3.7 Digital radar cables

For longer cable runs, a range of extensions is available for
SeaTalk hs and radar scanner power and data digital cables.
Note: The maximum length for the radar power and data digital
cable (including all extensions) is 25 m (82 ft).
Radar scanner to SeaTalk
Digital scanner cables
Connect the Radar scanner to the SeaTalk
power supply. These cables contain both power and data wires.
Cable Part number
5 m (16.4 ft) Digital cable A55076
10 m (32.8 ft) Digital A55077
cable
15 m (49.2 ft) Digital A55078
cable
25 m (82.0 ft) Digital A55079
cable
Extension cables
Use of one of these cables to extend the radar connection to the SeaTalk
(or crossover coupler) and power supply. These cables contain both power and
data wires.
24
hs switch (or crossover coupler)
hs switch (or crossover coupler) and
Notes
Cable
2.5 m (8.2 ft) extension
cable
5 m (16.4 ft) extension
cable
10 m (32.8 ft) extension
cable
SeaTalk hs switch (or crossover coupler) to display unit
hs
SeaTalk network cables
Connect from the SeaTalk
display.
Cable
1.5 m (4.9 ft) SeaTalk
network cable
5 m (16.4 ft) SeaTalk
network cable
10 m (32.8 ft) SeaTalk
network cable
20 m (65.6 ft) SeaTalk
network cable
hs switch
SeaTalk hs hardware
To connect the digital radar to a multifunction display you will need
to include one of the following:
Part number
A92141
A55080
A55081
hs switch or the crossover coupler into the rear of the
Part number
hs E55049
hs E55050
hs E55051
hs E55052
HD and SuperHD Digital Open Array Installation instructions
Notes
Notes