Mercedes-Benz SL Operator's Manual page 110

Instruments
Operation
and controls
Audio system
Cassette mode
Playing cassettes
Press the "TAPE" button. When the eject (EJ) key is
pressed, the display folds down and the cassette slot
becomes visible. Push the cassette into the slot until it
engages. The cassette will be pulled in automatically.
Note:
Do not press directly on the radio display face.
Return the display panel to its normal position by
folding it back up and pressing gently on the display
frame to lock in place.
Important:
If the display is in the down position for more than
20 seconds, 2 successive beeps will be heard. This will
continue at 5 second intervals until the display is
returned to its normal position.
Instrument
Driving
cluster display
Practical hints Car care
106
upwards. The cassette deck will automatically detect the
type of tape and switch the equalization automatically.
A cassette symbol in the display indicates that a tape is
in the mechanism. This symbol appears in all modes but
not in cassette mode.
The cassette will not be ejected when the radio is
switched off or another mode is selected.
will show "NO TAPE".
Technical
data
The radio will switch to
cassette mode. Track 1 will be
played and "SIDE 1"
displayed. Track 1 is the side
of the cassette which is facing
If a cassette is in the
mechanism, cassette mode
can be selected by using the
"TAPE" button. If no cassette
has been inserted, the display
Index