Table of Contents
Advertisement
12
Display
Programme progress display
After having pressed the button
washing program
selected type of fabric, an animated bar, that indicates the carried out cycle and the
remaining one, the duration of the washing program and the end of cycle.
Delay start
If you have selected the button
After having pressed the button
appears on the right side of the display with the corrisponding symbol.
The delay time value decreases every minute.
Incorrect option selection
If an option, which is not compatible with the set washing programme, is
selected, the message «Non selectable» is displayed for some seconds.
Alarm codes
In the event of operating problems, some alarm messages can be displayed, for
example «Cannot fill water. Please check that the tap is open and then
press START». (see chapter «What to do if...»).
End of the programme
When the programme has finished the corresponding message appears on the
diplay. The button
If your laundry is not removed during 10 minutes after the programme is finished,
the backlight of the display switches off and the energy saving system will be
enabled.
Only the button
switched off.
By pressing any button the appliance will come out from the energy saving status
and you could set another washing programme or swich the appliance off.
Downloaded From WashingMachine-Manual.com Manuals
8
, the display shows the running phase of the
7.9
. On the display you can see also the description of the
9
, the relevant symbol
8
, the selected delay time value (max 20 hours)
8
pilot light goes off.
8
pilot light is blinking to indicate that the appliance has to be
7.5
appears on the display.
Advertisement
Table of Contents
