Related Manuals for NEO NEO GM4
Summary of Contents for NEO NEO GM4
- Page 1 Expand Your Factory Radio iPod ® Owner’s Manual Neo Gateway Enjoy the Music...
-
Page 2: Table Of Contents
Table of Contents Pages 1. Introduction 2. Precautions 3. Compatibility 4. Dipswitch Settings 5. Installation 6. iPod Operation 7. HD Radio Operation (if equipped) Selecting AUX Input Selecting Factory Satellite (if equipped) 10. Troubleshooting 11. Warranty Info... - Page 3 Neo Gateway & Optional Add-ons Factory Radio Not Included iPod Neo Gateway Harness Not Included Neo Gateway 11Ft. iPod Cable 3Ft. HD Radio Cable (Sold with HDRT) HD Radio Tuner (sold seperately) Antenna Adapter (Sold Separately)
-
Page 4: Introduction
2. Precautions UPDATING iPod FIRMWARE For proper operation of the Neo Gateway, your iPod must be updated with the most recent version of firmware from Apple. This is done on your computer. To update the software on the iPod go to: http://www.apple.com/ipod/download/. -
Page 5: Compatibility
3. Compatibility 4. Dipswitch Settings All 4 dipswitches MUST be set in the OFF (up) position for proper operation. Fig. 1 Side view of interface with dip switches in correct position... -
Page 6: Installation
3. Disconnect the factory 16-Pin harnesses from the back of the radio. Disconnect the antenna from the radio. 4. Connect the 8-Pin iPod docking cable into the first port on the Neo Gateway (farthest away from dipswitches). Carefully run the 11 foot iPod cable behind the dash to the location where the iPod will be mounted or stored (for example the glove box or center console). - Page 7 Entering Mode Select Menu Leave and re-enter the SAT mode to enter the mode select menu. This can be accomplished by pressing the “FM” or “AM” icon, then pressing the “XM” icon. Once in the mode select menu, turn the rotary knob to scroll through available sources.
- Page 8 Browse by Artist Press “ ” to enter the browse menu. ”PL:LIST” will appear on your display. Turn the rotary tune knob until “AR:ARTIST” is displayed. Press “ ” to select browse by Artist. The list of Artists on your iPod will be displayed one at a time in alphabetical order.
- Page 9 Browse by Album Press “ ” to enter the browse menu. ”PL:LIST” will appear on your display. Turn the rotary tune knob until ALBUM is displayed. Press “ ” to select browse by Album. The Albums on your iPod will be displayed one at a time in alphabetical order.
- Page 10 you are searching in the artist folder. Turn the rotary tune knob to cycle through the artists. When the desired artist is displayed on the radio, Press “ ” to select that artist and display the albums by that artist. The Albums from the selected Artist will be displayed one at a time in alphabetical order.
-
Page 11: Hd Radio Operation (If Equipped)
7. HD Radio Operation Entering Mode Select Menu Leave and re-enter the SAT mode to enter the mode select menu. This can be accomplished by pressing the “FM” or “AM” icon, then pressing the “XM” icon. Once in the mode select menu, turn the rotary knob to scroll through available sources. -
Page 12: Selecting Aux Input
8. Selecting AUX Input Entering Mode Select Menu Leave and re-enter the SAT mode to enter the mode select menu. This can be accomplished by pressing the “FM” or “AM” icon, then pressing the “XM” icon. Once in the mode select menu, turn the rotary knob to scroll through available sources. -
Page 13: Troubleshooting
Radio shows iPod iPod cable is not Verify the docking cable is connected not connected connected to iPod or to the Neo Gateway, and the iPod Gateway. I can not correctly The iPod firmware Update iPod firmware for free at http:// control the iPod may be out of date. -
Page 14: Warranty Info
Within the first 12 months from date of purchase, subject to the conditions above, will repair or replace the product at their discretion, if it is defective in material or workmanship providing it is returned to an Authorized Neo Car Audio dealer, with PROOF OF PURCHASE from an authorized dealer. - Page 15 NOTES:...
- Page 17 BluStream Operation in: General Motors (PGHGM4 & ISGM574) Selecting Bluetooth Mode Navigation Radios Press the XM icon on the screen. Immediately turn the TUNE KNOB until BT is displayed. Press the >>>>> icon on the screen to select the displayed mode. Non-Navigation Radios Press the BAND button until XM is displayed.
-
Page 18: Navigation Radios
3. Call Waiting - Press PRESET 3 while in a call to answer a 3rd party call. You can also use PRESET 3 to switch between the calls. To end a 3rd party call you must press and HOLD PRESET 3 for 2 seconds. 4.