Loose clothes, jewellery or long cords increase the risk of electric shock. e) when operating a power tool outdoors, hair can be caught in moving parts. use an extension cord suitable for outdoor use. Lorenzo...
Use the power tool, accessories and European safety standards tool bits etc. in accordance with these instructions, taking into account the Class II machine – Double insulation working conditions and the work to be – You don’t need any earthed plug. performed. Lorenzo...
Page 8
• Use additional supports (tables, sheer- the front of the saw. legs and the like) for long pieces of work that can tip over and topple off the machine if they are not properly secured. Lorenzo...
It must be able to move the saw head is carried out, freely along the side of the saw blade. Lorenzo...
Page 10
Important! Place the material you want to metres a cable must be used with a saw flat on the machine surface and secure diameter of 2.5 mm with the clamping device (19) so that the material cannot move while you are cutting. Lorenzo...
Page 11
• Retighten the tightening screw (10) in • Re-tighten the locking handle (10) in order to secure the tumtable in place. order to fix the rotary table (8) in position. • Make the cut as described in “Section 2”. Lorenzo...
• Clean the saw blade flanges throughly before mounting the saw blade. • Reattach the movable blade guard (6) in reverse order. • Before using the saw again, check that the safety devices are in good working order. Lorenzo...
9.3 kg 2006/42/EC, 2006/95/EC, 2004/108/EC, 2002/95/EC, 2002/96/EC Lpa (Sound pressure level) 99.6 dB(A) Lwa (Sound power level) 112.6 dB(A) Vibration < 2.5 m/s LM&B BV KVK No. 101991107 The Netherlands Subject to change; specifications can be changed without further notice. Lorenzo...
The proof of purchase will be submitted. Rechargeable batteries, battery chargers and parts showing normal wear are not covered by this guarantee. If, during the period of guarantee, a defect emerges that cannot be repaired, free replacement of the tools takes place. Lorenzo...