Table of Contents
Advertisement
Electric Pole Saw
User Guide
Thank you for purchasing the Ivation Electric Pole Saw. This User Guide is intended to provide you with guidelines
to ensure that operation of this product is safe and does not pose risk to the user. Any use that does not conform to
the guidelines described in this User Guide may void the limited warranty.
Please read all directions before using the product and retain this guide for reference. This product is intended for
household use only.
This product is covered by a limited one-year warranty. Coverage is subject to limits and exclusions.
See warranty for details.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Ivation IVA-4308PCS
- Page 1 User Guide Thank you for purchasing the Ivation Electric Pole Saw. This User Guide is intended to provide you with guidelines to ensure that operation of this product is safe and does not pose risk to the user. Any use that does not conform to the guidelines described in this User Guide may void the limited warranty.
-
Page 2: Table Of Contents
Table of Contents Safety................2 Maintenance ............11 Parts List and Diagram..........5 Troubleshooting............13 Assembly..............7 Specifications ............13 Operation..............9 WARNING SYMBOLS AND DEFINITIONS This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. -
Page 3: Personal Safety
Power Cord Safety (cont.) 6. WARNING: Handling the cord on this product Connecting Cords will expose you to lead, a chemical known to the To reduce the risk of the cords pulling apart during operation, State of California to cause cancer, and birth do one of the following: defects or other reproductive harm. - Page 4 If unreadable or missing, slender material may catch the saw chain and be whipped around. contact Ivation for a replacement. 11. Carry Pole Saw with tool switched off and away from 18. The warnings, precautions, and instructions discussed in your body.
-
Page 5: Parts List And Diagram
Parts List and Diagram PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. - Page 6 Assembly Diagram...
-
Page 7: Assembly
Assembly Instructions Read the ENTIRE IMPORTANT SAFETY INSTRUCTIONS section at the beginning of this manual including all text under subheadings therein before set up or use of this product. TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION: Release the Trigger and unplug the appliance from its electrical outlet before assembling or making any adjustments. - Page 8 Tensioning Saw Chain Check the saw chain tension before use, after the first initial cuts, and periodically after regular use (about every 5 cuts). WARNING! A loose chain will increase the risk of kickback and may jump out of guide bar groove, leading to possible injury and property damage. A loose chain can also lead to rapid wear to chain and sprocket.
-
Page 9: Operation
Operating Instructions Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. • Before operating the gardening appliance, put on ANSI-approved safety goggles, hard hat and other safety gear. - Page 10 Avoiding Kickback During Use 1. Kickback occurs when the chain (at the tip of the guide bar) comes in contact with a log or wood, or when the saw chain becomes jammed, often when sawing sideward, slanted or during lengthwise cuts. WARNING! When kickback occurs, the Pole Saw can react unpredictably and cause severe injuries to the operator or bystanders.
-
Page 11: Maintenance
Cutting Thick Branches 1. When cutting larger branches, the following four cuts are necessary: First cut into the branch from below, outside of the location where you intend to cut off the branch. The cut should go one third to halfway through the branch. See Cut 1 on Figure 15, right. Cut into the branch from the top, making sure it’s outside from where the branch is to be sawn. -
Page 12: Sharpening Saw Chain
Replacing/Changing Saw Chain and Guide Bar 1. Check the condition of the saw chain and its mounting at regular intervals. If the saw chain is worn or blunt it must be replaced or sharpened immediately; If the Pole Saw starts to suffer from excessive vibrations, this means that the saw chain or guide bar has not been balanced correctly or has suffered deformation due to impacts. -
Page 13: Troubleshooting
Distributed by C & A Marketing Coverage is subject to limits and exclusions. See warranty for details. 2 Bergen Turnpike Ridgefield Park, NJ 07660 Customer Service: info@myivation.com info@myivation.com Made in China Ivation is a trademark of C&A IP Holdings, LLC 866-849-3049 ©2015 All rights reserved...
Need help?
Do you have a question about the IVA-4308PCS and is the answer not in the manual?
Questions and answers