Setting The Remote Control - Samsung DVD-VR320 Instruction Manual

Setting the Remote Control

You can control part of another manufacturer's TV
functions with this remote control.
• Control function buttons involve : TV POWER,
+
-
CH/TRK ( / ), VOL / , Direct number buttons,
TV MUTE, INPUT SEL.
To determine whether your television is
compatible, follow the instructions below.
1. Switch your television on.
2. Point the remote control towards the television.
3. Press the TV button and enter the two-figure code
corresponding to the brand of your television, by
pressing the appropriate number button.
Brand Codes
SAMSUNG 01,14,15,23,31
DAEWOO 19
EMERSON 21
GRADIENTE 30
HITACHI 10
JVC 11
LG 06,08,18
LOEWE 28
MAGNAVOX 04
MITSUBISHI 13
Result: If your television is compatible with the remote
control, it will switch off.
It is now programmed to operate with the remote
control.
■
If several codes are indicated for your
television brand, try each one in turn until you
Note
find one that works. If you replace the remote
control's batteries, you must set the brand code
again.
You can then control the television using the
following buttons.
Button Function
TV POWER Used to switch the television on and off.
INPUT SEL. Used to select an external source.
+
-
VOL / Used to adjust the volume of the television.
( / )
CH/TRK Used to select the desired channel.
TV MUTE Used to toggle the sound on and off.
0~9 Used to input number directly.
100+ Used to select channels over 100.
The various functions may not necessarily work
on all televisions. If you encounter problems,
Note
operate the television directly.
Brand Codes
NEWSAN 27
NOBLEX 25
PANASONIC 12,24
RCA 07,29
SANYO 05,20
SHARP 02,16,22
SONY 03
TELEFUNKEN 26
TOSHIBA 09
ZENITH 17
English - 21