Putting On A Cover-Jack - Samsung BD-P4600 User Manual

Hide thumbs Also See for BD-P4600:

Table of Contents

connections

case 2 : connecting to a Wireless iP sharer

You can connect to network with a Wireless IP sharer. See pages 51~52 for Wireless Network Setup.

This unit is compatible with Samsung's Wireless LAN Adapter only.

(Model name: WIS09ABGN).

You must use a wireless IP sharer that supports IEEE 802.11 a/b/g/n. (n is recommended for stable

operation of the wireless network.)

Wireless LAN, in its nature, may cause interference, depending on the use condition (AP performance,

distance, obstacle, interference by other radio devices, etc).

Set the wireless IP sharer to Infrastructure mode. Ad-hoc mode is not supported.

When applying the security key for the AP (wireless IP sharer), only the following is supported.

Authentication Mode : WEP, WPAPSK, WPA2PSK

Encryption Type : WEP, TKIP, AES

Putting On the cOVeR-JacK

To access the connection terminals, slide the cover jack off the unit. Replace it when you are fi nished making

connections.

32_ connections

Modem Port

Wireless IP sharer

Modem Cable

Wireless LAN

Adapter

Table of Contents