Download Print this page

Parts Diagram - Salton SFH460 Instructions And Warranty

Advertisement

The front grille gets hot during usage. Do not touch the grille while the heater is switched
on, nor immediately after switching off the heater since the grille requires time to cool
down.
Only handle the heater with dry hands.
Do not expose the appliance to atmospheric conditions (e.g. rain, sun etc)
Always ensure that the power cord is unwound properly to prevent overheating.
If the cord of this appliance is damaged, discontinue use of the product and contact the
manufacturer for further instructions. The cord must only be replaced by a service
representative of the manufacturer, since special tools and/or parts are required.
This heater is not intended for use in wet or moist locations such as bathrooms or laundry
areas. Do not use the heater near bathtubs, showers, wash basins or swimming pools.
Place at a minimum distance is 1m from any of these areas.
If the heater becomes wet, unplug it from the mains socket before touching it as a wet
heater may result in electrical shock even if turned off.

PARTS DIAGRAM

SAFETY POSITIONING
The heater must not be located immediately beneath a socket outlet.
For your own safety and that of others, do not use the heater in the immediate
surroundings of a bath, shower or swimming pool. Ensure that the appliance cannot fall
into water (bath wash basin, shower cubicle etc).
Do not use the heater in rooms with explosive gas (e.g. petrol) or while using a
flammable solvent or glue (e.g. when gluing or varnishing parquet floors, PVC etc).
Allow ample space around the heater. A safe area to be left clear is 50cm at the top and at
the sides, and 120cm at the front.
To prevent the risk of fire, do not hang anything on, in front of or above the heater when
it is switched on.
3

Advertisement

loading