Canon ZR40 Instruction Manual page 72

Setting the data code
E
You can also choose to display camcorder data (shutter speed and exposure
settings) in cassette data codes.
PLAY
(VCR)
( 39)
To change, open the menu and select DISP.SET UP. Then select DATA
CODE, set it to DATE/TIME, CAMERA DATA or CAM. & D/T and
close the menu.
D/TIME SEL.
Notes:
• The data code will read "– – –" in the following situations:
– During playback of a blank section of tape.
– If the tape was recorded before entering the date and time in the camcorder's
memory.
– If the tape was recorded on a camcorder without a data code function.
– If noise or tape damage prevents the data code from being read.
• If a recording made on ZR40 is played back on a different DV camcorder, the
data code may not be displayed correctly.
• The data code will appear in the display even if DISPLAYS (
set to OFF through the menu.
72
Downloaded from www.Manualslib.com
DISP.SET UP
Possible data code combinations:
DATA CODE
Date/Time
Date
JAN. 1,2002
Time
12:00:00 AM
Date & Time
12:00 AM
JAN. 1,2002
manuals search engine
DATA CODE•••DATE/TIME
Camera data
F11
F11
1/250
1/250 JAN. 1,2002
F11
F11 1/250
1/250 12:00:00 AM
F11
1/250
F11 12:00 AM
1/250 JAN. 1,2002
Date/Time &
Camera data
108) has been