Table of Contents
Advertisement
Maintaining water and dust
resistance
The device may be damaged if water or dust enters the device.
Follow these tips carefully to prevent damage to the device and to
maintain the water- and dust-resistant performance of the device.
• Do not immerse the device in water deeper than 1 m and keep it
submerged for more than 30 minutes.
• Do not expose the device to water moving with force, such as
ocean waves or waterfalls.
• Do not open the device's covers when the device is in water or in
very humid places, such as swimming pools or bathrooms.
• Do not open the back cover using wet hands or when the
device is wet.
• The rubber seal fitted to the back cover is an important
component of the device. Take care when opening and closing
the back cover to avoid damaging the rubber seal. Also, ensure
that the rubber seal is free from debris, such as sand or dust to
prevent damage to the device.
• Do not expose the device to salt water, ionised water, or
soapy water.
• The back cover may be loosened if the device is dropped or
receives an impact. Ensure that the back cover is properly
aligned and tightly closed.
• If the device has been immersed in water or the microphone
or the speaker is wet, sound may not be heard clearly during a
call. Ensure that the microphone or the speaker is clean and dry
by wiping it with a dry cloth.
• If the device gets wet, dry it thoroughly with a clean, soft cloth.
• The water-resistant design of the device causes it to vibrate
slightly in certain conditions. Vibrations in these conditions, such
as when the volume level is high are normal and do not affect
the device's performance.
11
Advertisement
Table of Contents
