Programming The Cd Tracks; Program Play - Sony MHC-GX8000 Operating Instructions Manual

GB
10
Downloaded From Disc-Player.com Sony Manuals
Playing the CD (continued)
To Do this
Play repeatedly Press REPEAT repeatedly to
(Repeat Play) select "REPEAT"
"REPEAT 1" *2
Cancel Repeat Press REPEAT until
Play "REPEAT" or "REPEAT 1"
disappears from the display.
Exchange other CDs Press DISC SKIP
while playing EX-CHANGE.
Remove the CD Press OPEN/CLOSE Z.
*1
All the tracks repeated up to five times.
You cannot use this function during SHUFFLE
ALL DISCS.
*2
To repeat the current track you are playing.
Tip
Pressing the CD while the power is off automatically
turns the power on and CD is selected as a function.
Programming the CD
tracks
–– Program Play
You can make a program of up to 25 tracks
from all the CDs in the order you want them to
be played.
1
Press CD.
2
Press PLAY MODE repeatedly until
"PROGRAM" appears in the display.
3
Press one of the DISC 1~3 to select a
CD.
To program all the tracks on a CD at once,
proceed to step 5 while "AL" appears on the
display.
4
Press . or > repeatedly until the
track you want appears in the display.
Disc tray
number
*1
or
.
PROGRAM
5
Press ENTER.
The track(s) is (are) programmed. The
program step number appears, followed by
the total playing time.
6
To program additional tracks, repeat
steps 3 to 5.
Skip step 3 to select tracks from the same
disc.
7
Press hH.
To
Cancel Program Play
Clear a track from
the end
Add a track to the
program when
playback is stopped
Tips
• The program you made remains in the system's
memory even after it has been played back. Press
hH to play the same program again.
• If "--.--" appears instead of the total playing time
during programming, this means:
– you have programmed a track number
which exceeds 20.
– the total playing time has exceeded 100 minutes.
Total playing time
Track (including selected
track)
number
Do this
Press PLAY MODE
repeatedly until "1 DISC" or
"ALL DISCS" appears in
the display.
Press CLEAR on the remote
when playback is stopped.
1 Press one of the DISC
1~3 buttons to select a
CD.
2 Press . or >
repeatedly to select the
track.
3 Press ENTER.
MHC-RG77 4-238-409-11 (2)