Advertisement
Know your Breville Nova Platinum Cordfree Kettle
Removable scale filter
Safety locking hinged lid
Illuminated power 'On/Off' switch
Safety auto cut off
and boil dry protection
Dual water windows
1.7 litre capacity
Premium quality stainless steel
2400 Watt concealed element
Multi-directional cordfree
power base with cord storage
6
Operating your Breville Nova Platinum Cordfree Kettle
Before first use
Remove any packaging material or promotional
stickers before using your kettle for the first time. It is
recommended before the first use to fill the kettle for
the maximum level with cold tap water, bring to the
Lid release button
boil and then discard the water. Your kettle will only
operate when positioned on the power base with the
ON/OFF switch in the ON position. The kettle will
automatically switch off once the water has boiled.
Operation of your kettle
1
To fill the kettle with water, remove it from the
power base and open the lid by pressing the lid
release button. The lid will automatically open.
Fill with the desired amount of water. Always fill
the kettle between the maximum and minimum
marks on the water window. Too little water will
result in the kettle switching off.
2. Ensure that the lid is closed and locked firmly
into place. Place the kettle firmly onto the power
base. Plug the power cord into the 230/240V
power outlet and switch 'ON'.
3.
Press the ON/OFF switch down to the 'ON'
position. The power 'ON' light will illuminate.
Always fill the kettle to between the maximum
(MAX) and minimum (MIN) marks on the exterior
of the water window on the kettle. Too little water
will result in the kettle switching 'OFF'. Filling
above the maximum mark on the exterior of the
kettle may result in boiling water splashing from
the kettle.
THIS APPLIANCE IS DESIGNED FOR BOILING OF DRINKING QUALITY WATER ONLY. NEVER
USE IT TO HEAT OR BOIL ANY OTHER LIQUIDS OR FOODSTUFFS. THE LID SHOULD ALWAYS
BE FIRMLY IN PLACE AND LOCKED INTO THE CLOSED POSITION BEFORE USE.
Do not remove the kettle from the power base
during operation. Ensure the kettle has switched
to 'OFF' position after the water has boiled,
before removing the kettle from the power base.
Note
Note
7
Advertisement
