Adsl Wan Connection - D-Link DSL-2650U Quick Installation Manual

3g/adsl/ethernet router with wi-fi and built-in switch

Hide thumbs Also See for DSL-2650U:

Table of Contents

DSL-2650U

ADSL WAN Connection

1. Go to the Net / WAN page and click the Add button.

In the General settings section, from the Provider drop-down list,

leave the Manually value.

From the Connection Type drop-down list, select the needed value.

4. From the Port drop-down list, select the DSL(new) value.

5. Specify a name for your connection (any name for easier identification) in

the Name field.

6. In the ATM section, specify the

then select a method of encapsulation from the Encapsulation Mode

drop-down list.

7. For the PPPoE and PPPoA connection types, enter authorization data

provided by your ISP in the PPP section (the username (login) in the

Username field and the password in the Password and Password

confirmation fields). If these data have not been provided by your ISP,

select the Without authorization checkbox.

Quick Installation Guide

VPI

and

VCI

in the relevant fields, and

Table of Contents