1. Manuals
  2. Brands
  3. Cutter Manuals
  4. Floor Machine
  5. SCX364
  6. Operating instructions manual

Cutter SCX364 Operating Instructions Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
86037150-AV
09/15/14
Operating instructions (ENG)
MODELS:
Read these instructions before using the machine.
SCX364
10052410

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SCX364 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Cutter SCX364

  • Page 1 Operating instructions (ENG) MODELS: SCX364 10052410 Read these instructions before using the machine. 86037150-AV 09/15/14...

  • Page 2: Machine Data Label

    Machine Data Label Overview The Saber Cutter is a battery powered, self-propelled, hard floor scrubber intended for commercial use. The appliance applies a cleaning solution onto a hard floor, scrubs the floor with brushes or pads, and then vacuums the soiled water back into the recovery tank.

  • Page 3: Table Of Contents

    To Remove Squeegee Assembly ....31 To Replace Or Rotate Front Side Squeegee Blade 31 To Adjust Front Side Squeegee Deflection..32 86037150 SCX364...

  • Page 4: How To Use This Manual

    KIT INSTRUCTIONS which came with the kit. It contains replacement parts numbers needed for ordering future parts. NOTE: The manual part number is located on the lower left corner of the front cover. 86037150 SCX364...

  • Page 5: Safety

    This appliance has been designed for use with the brushes specified by the manufacturer. The fitting of other brushes may affect its safety. Do not use on surfaces having a gradient exceeding 2% unless the optional parking brake is installed on the machine. READ AND SAVE THESE INSTRUCTIONS 86037150 SCX364...

  • Page 6: Hazard Intensity Level

    Disconnect batteries before working on machine. Only qualified personnel should work inside machine. Always wear eye protection and protective clothing when working on or near batteries. Avoid skin contact with the acid contained in the batteries. Never allow metal to lie across battery tops. 86037150 SCX364...

  • Page 7: Safety Label Location

    NOTE: These drawings indicate the location of safety labels on the machine. If at any time the labels become illegible, promptly replace them. SAFETY DECAL 86252530 PREV NO. 81494 PINCH POINT WARNING 86243830 PRV NO. 500663 BATTERY CAUTION 86252520 PRV NO. 80885 CIRCUIT BREAKER DECAL SEE MANUAL 86243530 PRV NO. 500565 2% GRADE WARNING 86037150 SCX364...

  • Page 8: Operations

    Minimum aisle u-turn width with 36 in. (90 cm) scrub head 73" (185 cm) Maximum rated climb and descent angle with empty tanks and without optional parking brake Maximum rated climb and descent angle with full tanks and without optional parking brake 86037150 SCX364...
  • Page 9 The weighted root mean square acceleration at the operator's arms was measured to be below 2.5m/s2 . This was a tri-axial, third-octave-band measurement made during normal operation on a composite tile floor. The measure- ment and related calculations were made in accordance with ANSI S3.34-1986. 86037150 SCX364...

  • Page 10: How The Machine Works

    The function of the recovery system is to vacuum the soiled water back into the recovery tank. The recovery The Saber Cutter is a battery powered, self-propelled, system consists of two squeegees, vacuum motor, float hard floor scrubber intended for commercial use. The ball filter, recovery tank and controls.

  • Page 11: Components

    6. Solution Tank 7. Solution Tank Cover 8. Solution Tank Drain Hose 9. Solution Strainer 10. Rear Squeegee 11. Top Cover 12. Vacuum Motor 13. Recovery Tank Dome 14. Scrub Head Swinging 15. Front Side Squeegee 16. Park Brake (Optional) 86037150 SCX364...

  • Page 12: Controls

    Operations Controls 86037150 SCX364...
  • Page 13 Shuts off machine. To shut off machine, push the switch. To restart machine, rotate the switch clockwise. 3. SPEED CONTROL KNOB Controls the speed of the machine. To increase speed, rotate knob clockwise. To decrease speed, rotate knob counterclockwise. 86037150 SCX364...
  • Page 14 To stop vacuum motor, press the top of the switch. 10. SQUEEGEE LIFT LEVER Raises and lowers the squeegee. To lower the squeegee, lift the lever from its raised position. To raise the squeegee, lift the lever from its lowered position. 86037150 SCX364...
  • Page 15 To release parking brake, push down and over out of the lock down notch. 15. HOUR METER Records the number of hours the machine has been in operation. This information is useful in determining when to service the machine. 86037150 SCX364...

  • Page 16: Machine Operation

    3. If an electrical problem is suspected push in emergency stop button, if machine is equipped with this option. Flammable materials can cause an explosion or fire. Do not use flammable materials in the tanks. 4. Apply brakes, if your machine is equipped with this option. 86037150 SCX364...

  • Page 17: Normal Scrubbing

    To Stop Scrubbing 1. Release the propel levers. 2. Turn the scrub brushes off. 3. Raise the scrub brushes. 4. Swing the outboard brush in. 5. Raise the squeegee. 6. Turn the vacuum off. 7. Turn the machine power off. 86037150 SCX364...

  • Page 18: Emptying And Cleaning Tanks

    4. Replace the drain plug and secure drain hose in bracket. 5. If machine is to be stored, leave the recovery tank dome off. RECOVERY TANK COVER SOLUTION TANK COVER RECOVERY TANK DRAIN SOLUTION TANK DRAIN 86037150 SCX364...

  • Page 19: Maintenance

    Check parking brake (inspect cables, linkages and pulleys) Check carbon brushes in all vacuum, brush drive, and propel motors Blow out dust in motors Inspect motor commutators Clean chains, cables and pulleys Clean pivot points on squeegee and scrub deck linkages 86037150 SCX364...
  • Page 20 3. Scrub Brushes 4. Float Shut-Off 5. Solution Strainer 6. Brush Motor 7. Traction Motor 8. Circuit Breakers 9. Scrubhead Fixed and Swinging 10. Vacuum Motor 11. Actuator Scrub Deck Up-Down 12. Actuator Scrub Deck In-Out 13. Front Side Squeegee 86037150 SCX364...

  • Page 21: Batteries

    4. Test battery condition with a hydrometer at least once a week. 5. Ensure that all connections are tight and all corrosion removed. 6. Every 4 to 6 months, remove the batteries from the machine and clean the battery cases and battery compartment. 86037150 SCX364...

  • Page 22: Checking Battery Specific Gravity

    (27°): Add (+) to the specific gravity reading 0.004 (4 points), for each 10°F (6°C) above 80° (27°C). Subtract (-) from the specific reading 0.004 (4 points), for each 10°F (6°C) below 80°F (27°C). 86037150 SCX364...

  • Page 23: Changing Batteries

    7. Raise battery cover and check the battery electro- lyte level. It should be up to the indicator ring. If necessary, add distilled water. 8. Lower the battery cover. FRONT OF MACHINE NOTE: For additional information about battery charger function, please see the charger Product Manual. 86037150 SCX364...

  • Page 24: Rear Squeegee

    5. Install squeegee retainer strap. 6. Fasten and lock latch, adjust latch only tight SQUEEGEE DEFLECTION enough to take up slack in retaining strap. CORRECT NOT ENOUGH TOO MUCH SIDE VIEW OF SQUEEGEE BLADE 86037150 SCX364...

  • Page 25: To Adjust Squeegee Pitch

    Repeat steps 1 through 4 until the deflec- (60cm). tion is equal across the entire rear squeegee blade. 6. Repeat steps 2 through 4 until deflection of 3/8 in. (9.5mm) is reached. SQUEEGEE DEFLECTION 8 " (9.5mm) CORRECT SIDE VIEW OF SQUEEGEE BLADE 86037150 SCX364...

  • Page 26: Scrub Brushes

    When used with the proper stripper, this pad leaves the and push the float screen assembly over the barb floor clean and ready for finishing. on the tube. The scrub brushes should be checked before each days work for wire, string, wear and damage. 86037150 SCX364...

  • Page 27: Solution Strainer

    3. Remove retaining bolt, lock washer, flat washer and star drive from brush motor shaft. 4. Remove 4 brush motor mounting bolts located under scrub deck. 5. Remove brush motor. 6. Reverse steps to install. 86037150 SCX364...

  • Page 28: Traction Motor

    Remove three bolts on each side that fasten the bracket to the cover and re-assemble in the top holes. When the brushes are replaced with new ones move the covers back to the lower set of holes. 86037150 SCX364...

  • Page 29: Vacuum Motor

    Spring inside brush housing will damage motor if brushes are allowed to wear away completely. 8 [9.5mm] Periodically check the length of the carbon brushes. Replace both carbon brushes when either is less than 3/8" (9.5mm) long. 86037150 SCX364...

  • Page 30: Actuator Scrub Deck Up-Down Removal/Replacement

    6. Connect actuator to lift linkage. 6. Connect actuator to linkage. 7. Check travel of actuator during operation. 7. Check travel of actuator during operation. 86037150 SCX364...

  • Page 31: Front Side Squeegee

    "OFF". 2. Disconnect vacuum hose from squeegee and loosen both mounting knobs. 3. Pull squeegee assembly rearward from the lifting carrier. 4. Inspect or repair as necessary and reinstall. 86037150 SCX364...

  • Page 32: To Adjust Front Side Squeegee Deflection

    Drive forward at least 2 feet (60cm) until the desired brush pressure is obtained. 6. Repeat steps 2 through 4 until deflection of1/4 in. (6.25mm) is reached. SQUEEGEE DEFLECTION CORRECT NOT ENOUGH TOO MUCH SIDE VIEW OF SQUEEGEE BLADE 86037150 SCX364...

  • Page 33: Axle - Recommended Greasing

    Maintenance Axle - Recommended Greasing 1-2 strokes of Mobiltemp®78 or compatible clay- based or calcium-based grease. 86037150 SCX364...

  • Page 34: Machine Troubleshooting

    Low battery charge Charge batteries Brush motors do not run, or runs Circuit breaker(s) tripped Reset circuit breaker(s) slowly Loose connection Check motor wires and connection Faulty brush motor contactor Replace contactor Worn brush motor brushes Replace brushes, check commutator 86037150 SCX364...
  • Page 35 Allow cool down period Controller overheated Adjust brush shroud if needed Loose connection Check motor wires and connection Uneven scrubbing or brush wear Debris caught in deck linkage Remove debris Worn or damaged deck linkage Replace worn or damaged parts 86037150 SCX364...
  • Page 36 Notes: 86037150 SCX364...

  • Page 37: Parts

    Parts PARTS 86037150 SCX364...

  • Page 38: Control Handle

    Control Handle 86037150 SCX364...
  • Page 39 SCREW, 4-40 X .625 PHPNHMS STL ZNPLT 86240990 HOUSING, BUTTON 86277060 SCREW, 8-32 X .875 PHPNHTC 86277050 SCREW, 5/16-18 X .75 SCHCS SS 86238740 HANDLE, RIGHT 86004120 PROPEL HANDLE ASM LEFT SRVC ONLY 86004130 PROPEL HANDLE ASM RIGHT SRVC ONLY 86037150 SCX364...

  • Page 40: Cover (Front) & Tank Mount

    Cover (Front) & Tank Mount 86037150 SCX364...
  • Page 41 FROM 86069500 BRKT, REC TO SOL BACK 86010670 WASHER 5/16 FLAT SS 86276780 SCREW, 5/16-18 X .75 HHCS SS 86062620 COVER, FRONT SQZ PLAY 24V 86004790 KNOB, 5/16-18 4 PRONG 86276380 SCREW, 5/16-18 X 1.25 SCHSET CP SS 86037150 SCX364...

  • Page 42: Cover (Top) & Tank Mount

    Cover (Top) & Tank Mount 86037150 SCX364...
  • Page 43 BRKT, TANK RIGHT 86233390 80887 CLAMP, 7/8 DIA "P" CUSHIONED 86271870 57290 NUT, 1/4-20 HEXTHIN NYLOCK SS 86276490 70670 SCREW, 5/16-18 X .625 HHCS SS 86292630 58004 NET, CARGO NOT SHOWN 86276780 70728 SCREW, 5/16-18 X .75 HHCS SS 86037150 SCX364...

  • Page 44: Decal

    Decal 86037150 SCX364...
  • Page 45 Decal SERIAL NO. PART NO. QTY DESCRIPTION NOTES FROM 86243560 LABEL, CUTTER RIGHT 86243880 LABEL, ELEC. PANEL, SQZ. PLAY 86243530 LABEL, ELEC PANEL LOWER 24V 86243600 LABEL, SQUEEGEE LEVER 86243550 LABEL, CUTTER LEFT 86243180 LABEL,SOLUTION FILL 24V 86004970 LABEL WINDSOR LOGO DOMED...

  • Page 46: Electrical Panel

    Electrical Panel DETAIL 'A' DETAIL 'A' 86037150 SCX364...
  • Page 47 SWITCH SPST 2-POSITION ROCKER 86242110 KNOB, .90 OD X .25 COLLET 86008900 BOOT, SEAL-PUSH BUTTON 7/16-28 86082580 PLATE, ELECT. PANEL CUTTER 36" 86237800 GASKET, ELEC PLATE, 24V 86279300 WASHER, 6 X .25 X .031 SPL SS 86273990 SCREW, 6-32 X .375 PHPNHMS SS...

  • Page 48: Lift Handle

    Lift Handle 86037150 SCX364...
  • Page 49 GRIP, 3/16 X 1.0 ORANGE 86259400 WASHER, THRUST .51ID X 1OD BRO 86082390 PLATE, LEVER NOTCH DELUXE 86276780 SCREW, 5/16-18 X .75 HHCS SS 86228840 BUSHING, .314 X .502 X .5 FLG 86006930 SCREW, 5/16-18 X 1 SCHBTNHCS SS 86037150 SCX364...

  • Page 50: Lift Handle Linkage

    Lift Handle Linkage 86037150 SCX364...
  • Page 51 27942 CABLE, .125 X 26.5 0707 SS LB E-E 86008650 80604 COTTER, 1/4" RING 86228900 09138 BEARING, FLANGED .252ID X .503OD 86259400 87205 WASHER, THRUST .51ID X 1OD BRO 86278910 87003 WASHER, 3/8 ID X 7/8 OD SS 86037150 SCX364...

  • Page 52: Recovery Tank

    Recovery Tank 86037150 SCX364...
  • Page 53 BRKT, VAC INTAKE 86010630 WASHER, 1/4 X .625 FLT SS 86273810 SCREW, 1/4-20 X 1 HHCS SS 86236410 FLOAT VAC SHUT OFF 86257860 TUBE, 1.5 WASTE 86257350 TEE, COMPRESSION 1.5 TUBULAR 86089640 TUBE, 1.5ODX.070WX2.80L PVC 86233140 CLAMP, 2.0" WORM GEAR 86037150 SCX364...

  • Page 54: Scrub Brush/Pad Driver

    Scrub Brush/Pad Driver 86037150 SCX364...
  • Page 55 SCREW, 12-11 X 1 PHPNHSMS SS TYPEA 86276580 SCREW, 8-32 X .75 PHTRHMS SS 86276600 SCREW, 10-12 X .75 PHTRHSMS SS TYPEA 86007910 SPRING EXT .31D X 2.0L X .03W 86007280 SOCKET, DRIVE BRUSH 86005940 PLATE BRUSH RELEASE 86037150 SCX364...

  • Page 56: Scrub Deck Motors

    Scrub Deck Motors A TORQUE TO 84.0 IN/LBS 86037150 SCX364...
  • Page 57 KEY, 1/4 X 1/4 X 1 LCSTL SUPP W/ MTR 86003420 DRIVER, BRUSH SD 86279630 WASHER, 5/16 X 1.13 X .09 FLT 86279130 WASHER, 5/16 X .583 X .078 SPL STL ZNPLT 86007020 SCREW, 5/16-18 X 1.25 HHCS SS NP 86037150 SCX364...

  • Page 58: Scrubdeck Right Frame

    Scrubdeck Right Frame A TORQUE TO 84.0 IN/LBS 86037150 SCX364...
  • Page 59 WASHER, 5/16 X .583 X .078 SPL STL ZNPLT 86007020 SCREW, 5/16-18 X 1.25 HHCS SS NP 86092440 FRAME, SQZ PLAY ASM, R 86271900 NUT, 10-24 HEXTHIN NYLOCK SS 86279930 DUCT, 1/2 ID SPLT FLX X 16" 86010670 WASHER 5/16 FLAT SS 86037150 SCX364...

  • Page 60: Scrubdeck Left Frame

    Scrubdeck Left Frame 86037150 SCX364...
  • Page 61 WHEEL 3" DIA CUSHION RUBBER 86001350 BUSHING, SPANNER .435 X 1.10 86277150 SCREW, 5/16-18 X 2 SCHBTNHCS SS 86271950 NUT, 5/16-18 X 1 COUPLING SS 86256500 STUD, BALL GAS SPRING 86010670 WASHER, 5/16 FLAT SS 86254930 SPRING, GAS 9.6 300 NEWTONS 86037150 SCX364...

  • Page 62: Scrubdeck

    Scrubdeck 86037150 SCX364...
  • Page 63 BRKT, SIDE ACTUATOR 86259420 WASHER, .510 X 1 X .093 THR 86006930 SCREW, 5/16-18 X 1 SCHBTNHCS SS 86228840 BUSHING, .314 X .502 X .5 FLG 86271870 NUT, 1/4-20 HEXTHIN NYLOCK SS 86271840 NUT 5/16-18 HEX NYLOCK THIN SS 86037150 SCX364...

  • Page 64: Scrubdeck Linkage 1

    Scrubdeck Linkage 1 86037150 SCX364...
  • Page 65 WASHER, .510 X 1 X .063 THR 86070270 BRKT, DECK LINKAGE LEFT 86076140 GUIDE, SQZ PLAY DECK LR 86010630 WASHER, 1/4 X .625 FLT SS 86273740 SCREW, 1/4-20 X 1.5 HHCS SS 86271840 NUT 5/16-18 HEX NYLOCK THIN SS 86228920 BEARING,.252 ID X.503 ODX.1.0 86037150 SCX364...

  • Page 66: Scrubdeck Linkage 2

    Scrubdeck Linkage 2 86037150 SCX364...
  • Page 67 SHOULDER BOLT, 3/8 X .375L SS 86224290 SPACER, .317ID X .5OD X .44LG 86006560 SCREW, 5/16-18 X 1 HHCS SS NP 86238510 GROMMET, 1.75ID X2.50OD X .25 86271840 NUT 5/16-18 HEX NYLOCK THIN SS 86075860 FRAME, MAINT TOWER 86037150 SCX364...

  • Page 68: Scrubdeck Lift

    Scrubdeck Lift 86037150 SCX364...
  • Page 69 86005730 NUT, 3/8-16 HEX STL GRA ZNPLT 86233410 CLAMP, 3/4 DIA CUSHION .406DIA 86248970 PIN, CLEVIS 3/8 X 2 STL ZNPLT 86011960 ACTUATOR, 24VDC 5.0 STRK 86272410 PIN, CLEVIS 3/8 X 1.625 STL ZNPLT 86069930 BRKT, SOLUTION FILL 86037150 SCX364...

  • Page 70: Solution 1

    Solution 1 HOSE FROM FILTER ASM. 86037150 SCX364...

  • Page 71: Solution 2

    NUT 5/16-18 HEX NYLOCK THIN SS 86276380 SCREW, 5/16-18 X 1.25 SCHSET CP SS 86233150 CLAMP, 3/8 HOSE (D-SLOT) 86197910 HOSEBARB 1/2 MPT X 1/2 POLY DL 86010670 WASHER 5/16 FLAT SS 86276780 SCREW, 5/16-18 X .75 HHCS SS 86037150 SCX364...
  • Page 72 Solution 2 TO SOLUTION TANK 86037150 SCX364...
  • Page 73 HOSE 1/2ID WIRE BOUND X 7" 86010540 VALVE 24VDC SOL.1/2"HOSEBARB 86003460 PROTECTION PART SRVC PART SLND SERVICE ONLY 86136820 SERVICE SLND SPRG KIT SERVICE ONLY 86271870 NUT, 1/4-20 HEXTHIN NYLOCK SS 86070380 BRKT, FILTER/SOLND SQZ PLAY 86264940 CABLE TIE 11.38" UL/CSA 86037150 SCX364...

  • Page 74: Solution Hose Asm

    Solution Hose Asm 86037150 SCX364...
  • Page 75 HOSE, 1/2ID WIRE BOUND X 6" 86001530 HOSEBARB, 1/2MPT X 1/2 HOSE 90 86264940 CABLE TIE 11.38" UL/CSA 86033220 MANIFOLD, SOLUTION FEED SRS 86198010 HSBRB, 1/2 MPT X 1/4 HOSE 90 D 86282210 HOSE, 1/4ID NYLOBRD X 9" 86037150 SCX364...

  • Page 76: Squeegee - Front Side

    Squeegee - Front Side 86037150 SCX364...
  • Page 77 86004790 KNOB, 5/16-18 4 PRONG 86007590 FRONT BLADE, SIDE SQZ 86094210 SIDE SQG FRAME WELDMENT 86007600 SP BACK BLADE, SIDE SQG 86088010 STRAP, SQUEEGEE BLADE BACK 86271900 NUT, 10-24 HEXTHIN NYLOCK SS 86279750 NUT, 5/16 PUSH STL ZNPLT 86037150 SCX364...

  • Page 78: Squeegee-Rear

    Squeegee-Rear 86037150 SCX364...
  • Page 79 86011020 WHEEL 3" DIA. CUSHION RUBBER 86276980 SCREW, 5/16-18 X 2 HHCS SS 86006270 PIN, CLEVIS 5/16 X 1.63 PLTD 86069870 BRKT, SQG WHEEL 86004890 KNOB,ALUM 3/8-16 NYLOCK NUT SS 86026530 SQUEEGEE ASM 26 IN SCRUBHEAD SRVC ASM 86037150 SCX364...

  • Page 80: Squeegee Lift Linkage (Lower)

    Squeegee Lift Linkage (Lower) 86037150 SCX364...
  • Page 81 PIN, CLEVIS 3/8 X 4.625 STL ZNPLT 86008870 BUSHING, 3/8 X .688 FLG 86010630 WASHER, 1/4 X .625 FLT SS 86008650 PIN, COTTER RING 1/4 X .041 X .844 86259400 WASHER THRUST.51 ID X 1 ODBRO 86008860 PIN, CLEVIS 3/8 X 5.5 STL ZNPLT 86037150 SCX364...

  • Page 82: Front Squeegee Linkage

    Front Squeegee Linkage 86037150 SCX364...
  • Page 83 SPRING, COMP .875ODX12LX.062W 86066880 BAR, SIDE SQG SPRING STRUT 86278370 SHOULDER BOLT, 5/16 X 1.75L SS 86078470 PIPE, 3/4 SH80 X 3.52, PVC 86224290 SPACER, .317ID X .5OD X .44LG 86089690 TUBE, 5/8 OD X .058 WALL, SS 86037150 SCX364...

  • Page 84: Vacuum

    Vacuum 86037150 SCX364...
  • Page 85 VAC MOTOR ASM, 24VDC 3 STAGE 86230810 BRUSH SET, 24V 3ST VAC AMETEK SRVC ONLY 86326980 BRUSH SET 24/36V VAC WINDSOR *(1) SRVC ONLY 86010630 WASHER, 1/4 X .625 FLT SS 86273810 SCREW, 1/4-20 X 1 HHCS SS 86064910 MUFFLER, VAC MOTOR *(2) 86037150 SCX364...

  • Page 86: Wheels And Frame

    Wheels And Frame 9ABCDE 86037150 SCX364...
  • Page 87 WHEEL ASM, 10" FMFL N-MARKING OPTIONAL 86354660 WHEEL, 10" BLK KNBY POLY FILL OPTIONAL 86354670 WHEEL, 10" N-MARKING POLY FILL OPTIONAL 86271860 NUT, 5/16-24 HEX NYLOCK SS 86081870 PLATE, TRANSAXLE SPACER 86278910 WASHER, 3/8 X .875 X .05 FLT SS 86037150 SCX364...

  • Page 88: Wiring-Battery

    Wiring-Battery 86037150 SCX364...
  • Page 89 86233360 CLAMP, CABLE KIT 86270890 NUT, 10-32 ACORN STL NKLPLT 86010650 WASHER, 10 X .562 X .032 FLT STL PSVT 86273980 SCREW, 10-32 X .75 PHPNHMS SS FOR 86312720 86312710 BLOCK, 3.5 X 4 X 5 FOAM BATTERIES 86037150 SCX364...

  • Page 90: Wiring-Control Panel

    BATTERY CABLE 11 RED 14 RED 13 RED 10 RED 65 RED 15 RED NEGATIVE BATTERY 56 RED 73 RED 51 RED 1/35 52 RED CABLE MAIN BRUSH BRUSH BRUSH PROPEL SWING RIGHT LEFT SWITCH 16 RED 880269 86037150 SCX364...
  • Page 91 Wiring-Control Panel SERIAL NO. PART NO. DESCRIPTION NOTES FROM 86239040 HARNESS, PANEL CUTTER 36" 86238990 HARNESS, PANEL, DELUXE 86261210 DIODE ASM, 76008 X 76008 86003410 DIODE ASM, 76075 X 76075 86267340 WIRE, 22" RED/18 76040 X 76075 86269300 WIRE, 16" RED/18 STRIP X STRIP 86267360 WIRE, 14"...

  • Page 92: Wiring-Main Harness

    75 BLK 78 RED VALVE 79 BLK 76 RED 77 BLK 74 RED DIAGRAM B 5 BRN 82 BRN PROPEL MOTOR 83 BLK 68 GRN/YLW 69 RED 6 BLK 78 RED 79 BLK DIAGRAM C 80 RED 81 BLK 86037150 SCX364...
  • Page 93 Wiring-Main Harness SERIAL NO. PART NO. QTY DESCRIPTION NOTES FROM 86239030 HARNESS, MAIN CUTTER 36" 86238980 HARNESS, MAIN 86037150 SCX364...

  • Page 94: Wiring-Schematic

    Wiring-Schematic INDICATES OPTIONAL ACCESSORY 86037150 SCX364...

  • Page 95: Options

    Options OPTIONS 86037150 SCX364...

  • Page 96: Brake

    Brake 86037150 SCX364...
  • Page 97 WASHER, 1/4 X .625 FLT SS 86271870 NUT, 1/4-20 HEXTHIN NYLOCK SS 86070150 BRKT, TANK MOUNT 24V 86259400 WASHER THRUST.51 ID X 1 ODBR 86228900 BUSHING, .252 X .503 X .75 FLG 86273820 SCREW, 1/4-20 X 1.25 HHMS SS 86077280 LEVER, BRAKE 86037150 SCX364...

  • Page 98: Emergency Stop

    Emergency Stop 86037150 SCX364...
  • Page 99 Emergency Stop SERIAL NO. PART NO. DESCRIPTION NOTES FROM 86007180 SWITCH EMERGENCY STOP 86269300 WIRE, 16" RED/18 STRIP X STRIP NOT SHOWN 86037150 SCX364...

  • Page 100: Suggested Spare Parts

    STRAINER, 1/2 HOSE 20 MESH 86254930 SPRING, GAS 9.6 300 NEWTONS 86004180 HOSE, 1.5 BLK VAC X 28" 86004250 HOSE, 1.0 BLK VAC X 8 FT 86010540 VALVE, 24VDC SOL 1/2" HOSEBARB 86011020 WHEEL, 3" DIA CUSHION RUBBER 86037150 SCX364...

  • Page 101: Serial Numbers

    Serial Numbers REF. MODEL: SERIAL # 1000122411 1000122451 10052410000076 86037150 SCX364...

Table of Contents