Horizontal Viewing Angle - Bush ELED42240FHDCNTD3D Installation & Operating Instructions Manual

Top bottom: Displays 3D content which is
originally in a form of top and bottom.
Off: 3D function mode is turned off.
2D Only
If content is 3D but you want to watch it in 2D,
you can switch to 2D only mode. There are 2
RSWLRQV /()7 DQG 5,*+7 WR VHOHFW ZKLFK VLGH
of the content you want to watch in 2D.
NOTE: This item is available when TV is
in 3D mode.
Virtual 3D
Conversion from 2D to 3D. There are 3 different
levels of depth: Low – Medium – High.
NOTE: This item is available when TV is
not in 3D mode.
Left/Right Swap
You can use this setting to shift the phase of the
3D left/right broadcast.
3D Depth Sense (optional)
This setting enables the control of 3D depth.
NOTE: If you select 3D modes, wear the
supplied 3D glasses when this message is
displayed on the screen:
3D Viewing Information
Your 3D Viewing experience can be affected
by the location of the viewer and the TV set. To
maximise your enjoyment we recommend you
follow the guidelines below:
Viewing Distance
Size
22 26
(inch)
Viewing
1,30 1,50 1,90
distance
(m)
Size
42 46
(inch)
Viewing
2,50 2,75
distance
(m)
For any help concerning set up and use of your TV please call the Customer Helpline: 0044 845 604 0105

Horizontal Viewing Angle

Vertical Viewing Angle
It is always recommended to place a TV at the
correct seated eye height of the viewer. If the TV
must be placed higher or lower it should be tilted
accordingly in its stand or wall mount.
32 37 40
2,20 2,40
47 55
2,80 3,25
39